Original Cross Drilled Brakes Audi

[zeke]

Do anybody know the part number in the optional cross drilled brakes from audi?

Thanks

Zeke

[simple1]

They were not optional as such, they are Quattro GMBH
YTH Perforated brake discs, 1100.00
front/rear wheels
YTI Perforated brake discs, front wheels 580.00
YTJ Perforated brake discs, rear wheels 520.00

[zeke]

Ok, so I can just go to any AUDI Distributor and just ask for:
YTI Perforated brake discs, front wheels 580.00
YTJ Perforated brake discs, rear wheels 520.00

Thanks

Zeke

[simple1]

You need to inform them that they are Quattro GMBH parts and normal Audi parts, most dealers will only understand VAG part numbers

[johneroberts]

Zeke
best bet is to buy them from a retailer in Germany
Audi Zentrum
Am Main
Frankfurt
Herr Wintermeier
they know about them
Cheers
jr

[kiwi_mtm]

Do anybody know the part number in the optional cross drilled brakes from audi?

Thanks

Zeke

can you run them with std pads ?

[RS4ever]

can you run them with std pads ?

Yes, no problem. They will wear out quicker because they keep getting a layer skimmed off them, but your disks will last longer. You must certainly NOT use the Pagid yellows that are supplied with them.

I use, on JR's recommendation, pagid orange fronts and blue rears.

[DavidU]

Hello their i have the X drilled numbers as i have been putting them on RS4"S with RS6 calipers and pads.The result is a very hard peddal and no brake fade its worked on the vehicles i have modded havent had any problems
DavidU.

[bjacks]

Where have you been sourcing the parts David?

Cheers

Ben

[zeke]

So, David?

[K2]

I am just going through with front brake upgrade, using RS6 cross drilled discs for my RS4, which are strangely about the same price as RS4 standard solid discs!
They can be bought off the shelf from an Audi dealer as they are an option for the RS6, and fitted to the 6+ as standard kit.
They are being fitted with Brembo 6 pot GT3 callipers.
I will post a more detailed description following the work, regarding any alterations that may be neded to make the rotors fit the RS4. When I was looking for the drilled GMBH RS4 discs, I had resolved that going direct to GMBH was probably the most direct solution, following advice from VAG parts.

[TWH]

From what I've heard, GmbH are an impossible company to contact/deal with, thius is why Audi IK won't get the GmbH discs in. Unfortunately the guy at AMD lost his supplier for GmbH about a month ago and is trying to find a new one at the moment. If anyone else has managed to find a supplier please do tell as I need to put on a new set of rear discs and wanted to go the GmbH route!

[TarmacTerrorist]

JR psoted a contact further up this thread, Mr Herr Wintermieir (sp), phone international directory for there number

[johneroberts]

From what I've heard, GmbH are an impossible company to contact/deal with, thius is why Audi IK won't get the GmbH discs in. Unfortunately the guy at AMD lost his supplier for GmbH about a month ago and is trying to find a new one at the moment. If anyone else has managed to find a supplier please do tell as I need to put on a new set of rear discs and wanted to go the GmbH route!

Thats because Bushy and my self were actually sourcing them from Zentrum Audi in Frankfurt vis Herr Wintermeier, i cant remember how many times i have posted this number up..use the serach facility
Cheers
jr