RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Owners manual/book set?

Hi all, We're off to France in the new year and will be going in the RS6, how can I set the lights for euro-driving? I've checked in the MMI menu and there's no option there and looking on the OBDEleven I've not got the right software version to enable their tourist mode. Are there any little levers...

Charmie86 wrote: ↑

Thu Nov 03, 2022 1:26 pm

i know this is silly question but you havent got the memory seats switched off on the buttons cause my wife has a habbit of knocking the on/off button

I excitedly thought that might be the problem and rushed out in the rain to check, but sadly no.

I'd be interested in the exhaust if it's still available?

(I'm thing of taking the wadding from the back boxes to get a bit more noise)

Thanks, good info.

The memory function doesn't work on the drivers side (works fine on the passenger side). From what I've read the seat needs a reset.

(I've tried the all the way forwards, up, back, down thing - no joy)

Hi all,

What the view on Vagcom/VCDS versus OBDeleven?

I need to do a couple of reset functions, DTC memory of ECU Number 2 and reset of drivers seat memory.

Would welcome people's opinions.

Thanks!

Answered my own question here. The shift knob and gaiter from a B8 RS4 fit perfectly, the aperture is exactly the same size. The only difference being the plastic trim that the leather gaiter is stapled to - the clips are in a different position. I carefully removed the staples and swapped them over...

Just to revive this...

Will any RS shifter from the same era fit? (specifically the gaiter)

It's not done it since, so waiting to capture codes, typical!

Shoppinit wrote: ↑

Wed Nov 17, 2021 6:01 pm

Except it’s not the right part number.

Yes, I get that, it was a follow on from “ O1L goes NLA, 01V…”

I’d very much like to know what the differences (if any) are and it lists the RS6 as being a suitable fitment (given the usual skeptical view of eBay accuracy, obviously)

Interesting the potential options here, this one lists the RS6 (03-04) as a fitting: https://www.ebay.co.uk/itm/01V919821-B-Fit-VW-Passat-Audi-A4-A6-A8-S4-Neutral-Safety-Multi-function-Switch-/373787636216?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338268676&toolid=10044&customid=CjwKCAiA...

Thanks guys!

I'll think I'll go via the modification of the gearbox mount as per the bottom of here: viewtopic.php?t=116756 (unless not recommended)

Thanks - are there two connector types?

(Just called Audi and they're after 192+vat)

Mɐʇʇ wrote: ↑

Fri Nov 12, 2021 6:09 pm

Looks like there's still stock too, should work out about 180ish quid

Thanks - from Audi?

(Searching reveals two different connector types, one round and one oblong - both seem to have ten pins.

Ah, okay, makes sense.

I'm in Cheltenham.

On the F125 switch, reading this forum the part number (seems to be) 01L 919 821 B, when I google it the results come up as 01V 919 821 B

Is that correct?