Any advice on this please...

Diagnostic Trouble Codes (DTC) / VCDS (VAG-COM) forum
Post Reply
User avatar
ogg14
1st Gear
Posts: 82
Joined: Mon Sep 17, 2007 10:49 pm
Location: Scotland, UK

Any advice on this please...

Post by ogg14 » Sun Nov 02, 2008 1:02 am

Hi there...

I have just ran my new Vagcom tonight i found these 2 fault codes... Any advice would be appreciated...

1999 pre-face lift Audi S4... AGB...


Address 01: Engine
Control Module Part Number: 8D0 907 551 C
Component and/or Version: 2.7l V6/5VT 0002
Software Coding: 05611
Work Shop Code: WSC 00870
2 Faults Found:

17544 - Fuel Trim: Bank 1 (Add): System too Lean
P1136 - 35-00 - -
17546 - Fuel Trim: Bank 2 (Add): System too Lean
P1138 - 35-10 - - - Intermittent

Readiness: 0000 0000
Saturday,01,November,2008,09:09:52:62310
VCDS Version: Release 805.1
Data version: 20081017

Thanks again...

Andy

yorkie
4th Gear
Posts: 699
Joined: Sat Oct 14, 2006 6:33 pm
Location: Cambridge UK

RE: Any advice on this please...

Post by yorkie » Sun Nov 02, 2008 9:20 am


User avatar
kbee
Neutral
Posts: 28
Joined: Wed Jun 06, 2007 3:20 pm

Post by kbee » Tue Nov 11, 2008 6:44 pm

air mass big favorite / ps dont buy aftermarket replacement if it turns out to be the fault!

User avatar
ogg14
1st Gear
Posts: 82
Joined: Mon Sep 17, 2007 10:49 pm
Location: Scotland, UK

Post by ogg14 » Wed Nov 12, 2008 3:30 am

I have already replaced the MAF... i will be doing more tests over the next few days... so i might pressure test it as well... My H and R parts have arrived so they will be fitted over the weekend...

Thansk for your reply though...

Andy

Post Reply

Return to “DTC / VCDS”

Who is online

Users browsing this forum: No registered users and 26 guests