viewtopic.php?f=64&p=981244#p981244
Clutching at straws...but just maybe?
-
Weiß-sechs
- 5th Gear
- Posts: 1219
- Joined: Wed Nov 20, 2013 3:49 pm
- Location: Everywhere & nowhere baby, that's where I'm at...
-
steve2003rs6
- Cruising
- Posts: 2935
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Clutching at straws...but just maybe?
Bought a new one a short while back from Audi Tradition IIRC.
-
Weiß-sechs
- 5th Gear
- Posts: 1219
- Joined: Wed Nov 20, 2013 3:49 pm
- Location: Everywhere & nowhere baby, that's where I'm at...
Re: Clutching at straws...but just maybe?
Cheers Steve. Good to know they're still available.steve2003rs6 wrote: ↑Wed Nov 27, 2024 5:37 pmBought a new one a short while back from Audi Tradition IIRC.
Re: Clutching at straws...but just maybe?
Avus Avant, RNS-E mk2 with sds and Bluetooth, Milltek, Hotchkis, Bilstein, Forge, ITG, A.C.E, Wagner, FBMFSW, MTM.
-
Weiß-sechs
- 5th Gear
- Posts: 1219
- Joined: Wed Nov 20, 2013 3:49 pm
- Location: Everywhere & nowhere baby, that's where I'm at...
Re: Clutching at straws...but just maybe?
Sorry to say Steve but they are no longer available from Audi Tradition - It's a bloody shame as I will probably need one in the springsteve2003rs6 wrote: ↑Wed Nov 27, 2024 5:37 pmBought a new one a short while back from Audi Tradition IIRC.
Daytona RS6 C5 Avant. BRV Plus Engine, 550cc Injectors, Custom Tune, DO88 Silicone Pipework, Waggers, Hybrid Turbos, Direnza DownPipes with 200 CEL CATS, Milltek Exhaust, Sonnax Modified Valve Body, Uprated Clutches, Uprated Torque Convertor, R8 Carbon Ceramics, K&W v1, Exclusive Interior, Creations Motorsport Billet Coolant Cap and PCV Valve (woohoo)
-
steve2003rs6
- Cruising
- Posts: 2935
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Clutching at straws...but just maybe?
If you can remove it. Any decent engineering Shop could replace the thread.
Re: Clutching at straws...but just maybe?
Was just thinking the same as I have seen these pics recently.steve2003rs6 wrote: ↑Wed Nov 27, 2024 6:54 pmIf you can remove it. Any decent engineering Shop could replace the thread.
- Attachments
-
-
Daytona RS6 C5 Avant. BRV Plus Engine, 550cc Injectors, Custom Tune, DO88 Silicone Pipework, Waggers, Hybrid Turbos, Direnza DownPipes with 200 CEL CATS, Milltek Exhaust, Sonnax Modified Valve Body, Uprated Clutches, Uprated Torque Convertor, R8 Carbon Ceramics, K&W v1, Exclusive Interior, Creations Motorsport Billet Coolant Cap and PCV Valve (woohoo)
-
steve2003rs6
- Cruising
- Posts: 2935
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Clutching at straws...but just maybe?
Sorry guys my mistake. Been through my parts invoice files.
Christ have I really spent that much.
All 8 oil hoses/pipes and oil cooler were from RScarparts Hartmannsdorf in Germany.
The radiator and cooling fans were from Audi Tradition.
All of the above installed in June last year.
The new oil cooler was 546.00 euros.
For info. My old oil cooler with hoses connected went to Captain Ric. I think he still has it.
Re: Clutching at straws...but just maybe?
This is why I binned mine off and went full aftermarket with mine runs a lot cooler too-I’ve got one mate but the lower left(if looking straight on) pipe is stuck on.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
c5 rs6 owner thats been known to cut the wrong wire.............
-
steve2003rs6
- Cruising
- Posts: 2935
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Clutching at straws...but just maybe?
Craig the oil cooler is Still available at RSCarparts but are now over double the price from what I paid last year.
Jayjay. IIRC you had a really nice setup.
I just wanted to keep mine as it was.
-
Weiß-sechs
- 5th Gear
- Posts: 1219
- Joined: Wed Nov 20, 2013 3:49 pm
- Location: Everywhere & nowhere baby, that's where I'm at...
Re: Clutching at straws...but just maybe?
Thanks for all the comments guys.
Managed to find one at a not too horrible price. Hopefully it'll last me....
https://www.carcooling.co.uk/new-audi-r ... gJ8hPD_BwE
Managed to find one at a not too horrible price. Hopefully it'll last me....
https://www.carcooling.co.uk/new-audi-r ... gJ8hPD_BwE
Re: Clutching at straws...but just maybe?
A lot cheaper than through eBay. I wonder why.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
-
steve2003rs6
- Cruising
- Posts: 2935
- Joined: Mon Aug 19, 2019 7:43 pm
Re: Clutching at straws...but just maybe?
Good find mate.
That’s more like the price I paid last year.
That’s more like the price I paid last year.
-
Weiß-sechs
- 5th Gear
- Posts: 1219
- Joined: Wed Nov 20, 2013 3:49 pm
- Location: Everywhere & nowhere baby, that's where I'm at...
Who is online
Users browsing this forum: No registered users and 164 guests