Paintless Dent Repair. Aberdeenshire

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
Fraser RS4
Neutral
Posts: 47
Joined: Thu Nov 15, 2012 11:40 pm
Location: Aberdeenshire

Paintless Dent Repair. Aberdeenshire

Post by Fraser RS4 » Fri Jun 05, 2015 10:58 pm

Evening all.

Looking to get two little dings removed from the car. One on the drivers door & second one on the passenger rear door. Has anyone had any experiences with this process in the Aberdeenshire area? Good or bad experiences welcome / cost / drop your car off or was it a home service where they meet you at home or place of work to carry out the repair.

Thanks for your time gang.
Some beautiful paths can't be discovered without getting lost.

Bogyoch
Neutral
Posts: 33
Joined: Wed Nov 12, 2014 9:58 pm

Re: Paintless Dent Repair. Aberdeenshire

Post by Bogyoch » Sun Jun 07, 2015 7:31 pm

There's a guy who does the rounds, and he visits Morrison Motors in Turriff on a Thursday. He massages the dinks out from inside the panel and usually you cannot see the repair. The quality of the repair will depend on whether he can get behind the panel and whether the paint has cracked.

The work I have had done is first class.

lma07
3rd Gear
Posts: 450
Joined: Mon May 21, 2007 10:06 pm
Location: Aberdeen

Re: Paintless Dent Repair. Aberdeenshire

Post by lma07 » Thu Jun 11, 2015 10:49 pm

We tried dents away on the Porsche. It's amazing what they could do.

boombastik
3rd Gear
Posts: 351
Joined: Tue Jul 02, 2013 8:32 pm
Location: Aberdeenshire

Re: Paintless Dent Repair. Aberdeenshire

Post by boombastik » Fri Jun 12, 2015 7:05 am

I used dent devils, the guy is based in Dundee but comes to you, they have a website and you send them pictures of the dents and they will let you know if it can be pushed out or not
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec

My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: EireRS6, Google [Bot], Google Adsense [Bot], rshales007 and 108 guests