LED Interior lights

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
User avatar
Shoppinit
Cruising
Posts: 20308
Joined: Wed Dec 31, 2008 6:24 pm

Re: LED Interior lights

Post by Shoppinit » Sat Mar 24, 2012 11:41 am

Wins prize for most pointless mod?

At least it shows how to get the door panel off.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: LED Interior lights

Post by Mr Footlong » Sat Mar 24, 2012 11:54 am

Thanks Mav but I think that may be one of those "haven't got anything else left to mod" jobs :)
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.

User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: LED Interior lights

Post by Mr Footlong » Sat Mar 24, 2012 6:38 pm

Ok, final list of all the LED/parts I used but haven't touched the front/rear foglights yet, pretty sure I haven;t miscounted/missed any:

Front driver footwell - 1x U376UCW 6LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1493.html

Front passenger Footwell if modding to the bigger lens - 1x U376UCW 6LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1493.html

Front passenger footwell upgraded lens for above - Audi Part Number P A331 947 113 - Approx £11

Front Passenger Footwell if using standard lens and soldering - 1x U376UCW 6LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1493.html

Front main roof interior lighting - 2x U426UCW 6LED Cool White 42MM Festoon - http://www.ultraleds.co.uk/42mm-leds-fe ... -1461.html

Front roof reading lights - shown in this link, would advise no longer than these at all - http://forum.rs246.com/viewtopic.php?f= ... 15#p504191 - Too little voltage to work on their own when used while headlights are on, work fine when main lights off or when activated with main roof lights/opening car etc

Front vanity mirror lights - 2x U373CW 3LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1496.html

Rear main roof interior lighting - 2x U376UCW 6LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1493.html

Rear roof reading lights - shown in this link, would advise no longer than these at all - http://forum.rs246.com/viewtopic.php?f= ... 15#p504191 - Too little voltage to work on their own when used while headlights are on, work fine when main lights off or when activated with main roof lights/opening car etc

Avant Boot roof lights - 2x U373CW 3LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1496.html

Avant Bootlid light - 1x U376UCW 6LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1493.html

Rear Numberplate lighting - 2x U373CW 3LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1496.html

Reverse light bulbs for Smoked Dectane lenses - 2x U382CW24 24x5050 LED Cool White 382 Bulb - http://www.ultraleds.co.uk/382ba15s-505 ... -2313.html

Glovebox light (REQUIRES CUTTING OF LENS PARTS/SOLDERING as per images in this thread) - 1x U373CW 3LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1496.html

Bottom Door lights (REQUIRES CUTTING OF LENS PARTS/SHAVING OF LED PCB/SOLDERING as per images in this thread) - 4x U376UCW 6LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1493.html

Side Door lights (REQUIRES CUTTING OF LENS PARTS/SOLDERING as per images in this thread) - 4x U373CW 3LED Cool White 37MM Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1496.html


------------------------------------

If going for the lot then to simplify it:

10x 37MM 6LED Cool White Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1493.html - £42

9x 37MM 3LED Cool White Festoon - http://www.ultraleds.co.uk/37mm-leds-fe ... -1496.html - £32.40

2x 42MM 6LED Cool White Festoon - http://www.ultraleds.co.uk/42mm-leds-fe ... -1461.html - £9.98

2x Twin pack of Ebay BA9S LED bulbs as per http://forum.rs246.com/viewtopic.php?f= ... 15#p504191 - £12

2x U382CW24 24x5050 LED Cool White 382 Bulb - http://www.ultraleds.co.uk/382ba15s-505 ... -2313.html - £30.62

1x Matched Drivers side footwell lens for Passenger side footwell - Audi Part Number P A331 947 113 - Approx £11

I will upload a final photo or 2 of the finished modded soor lenses so you can see exactly how I fitted them for those results.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.

User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: LED Interior lights

Post by Mr Footlong » Sat Mar 24, 2012 6:59 pm

Pics of the final modded lenses dotted around the car for reference, showing gaps etc:
P1010378.JPG
P1010380.JPG
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.

User avatar
Shoppinit
Cruising
Posts: 20308
Joined: Wed Dec 31, 2008 6:24 pm

Re: LED Interior lights

Post by Shoppinit » Tue Jan 08, 2013 3:04 pm

Footers, I hope you don't have to return any of your ultraled LEDs - their aftersales service is truly crap. I am pissed off because they won't honour the warranty on some LEDs I bought recently - not only that but they are fcuking rude, too.

@everyone else: if you can find those bulbs elsewhere then you'll be saving yourself a headache if you ever have to return any. :thumbs:
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: LED Interior lights

Post by Mr Footlong » Mon May 13, 2013 8:53 am

Never saw your reply Shopp. Happy to report that all even with 3 cars that are fully decked out with LED lighting, no failures at all yet.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.

User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: LED Interior lights

Post by Mr Footlong » Tue Apr 04, 2017 11:24 am

Bringing this back from the dead, holy crap my soldering game has improved since I made these monstrosities up, but you don't see any of that anyway. Just for the hell of it, almost 5 years on, all modded units still working perfectly, zero failures in either this car or the 4, did the same mods to her too.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.

Mark-RS
4th Gear
Posts: 798
Joined: Thu Sep 15, 2016 1:13 pm

Re: LED Interior lights

Post by Mark-RS » Thu Jan 18, 2018 12:53 am

Since this thread is years old and likely out of date, has anyone tried the eBay ones ?

Apparently plug and play ? No soldering, butchering etc required...

http://www.ebay.co.uk/itm/INTERIOR-CEIL ... SwU-pXtLCw

Fpr less than 25 fine English pounds i'm considering taking a gamble on them.

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot], srichards and 79 guests