F125 picture
-
- 1st Gear
- Posts: 92
- Joined: Wed Jan 03, 2018 1:20 am
F125 picture
Does anyone have a gbox removed so they can take a picture of the F125 switch so i know where it is and can identify it.
thanks
Julian
thanks
Julian
Re: F125 picture
You'll have no trouble identifying it, it's about 3" or 4" across and has and oddly-shaped black plastic cover.
Here's a picture of one off the car:
Here's a picture of one off the car:
-
- 1st Gear
- Posts: 92
- Joined: Wed Jan 03, 2018 1:20 am
Re: F125 picture
thank you
Do you think that a gearbox rebuilder like Chester transmissions etc would put a new one on as part of the rebuild cost or do you think or would that be deemed an ancillary?
Many thanks
Julian
Do you think that a gearbox rebuilder like Chester transmissions etc would put a new one on as part of the rebuild cost or do you think or would that be deemed an ancillary?
Many thanks
Julian
Re: F125 picture
I would have thought the rebuild would be just the internals.
-
- 1st Gear
- Posts: 92
- Joined: Wed Jan 03, 2018 1:20 am
Re: F125 picture
fair enough ta muchly
-
- Top Gear
- Posts: 2419
- Joined: Mon Aug 19, 2019 7:43 pm
Re: F125 picture
Another job to add to my unit 20 visit in April. If I can afford it.
Cambelt,full service and door locks visit.
I believe I am still on the original F125 switch
Cambelt,full service and door locks visit.
I believe I am still on the original F125 switch
Re: F125 picture
When unit 20 / Chester did mine the switch was not changed.
Avus Avant, RNS-E mk2 with sds and Bluetooth, Milltek, Hotchkis, Bilstein, Forge, ITG, A.C.E, Wagner, FBMFSW, MTM.
-
- 1st Gear
- Posts: 92
- Joined: Wed Jan 03, 2018 1:20 am
Re: F125 picture
How has your box and converter been/behaved since you got a rebuilt box from chester and how long ago/many miles since. Hope you dont mind me asking but interested in your views i.e a real life review of qulaity/longevity ta
Re: F125 picture
They did mine back end of 2014. Has about 16K on it now. All good.
"not a professional engineer, mechanic and mechanist"
Re: F125 picture
Think mine was roughly about the same but i had an Edge racing / ACE torque converter fitted as a precaution (stage 2 map). Box has been fine but did have an F125 switch a couple of years ago and now I get the occasional inverted PRNDS display. I have got a spare TCU to try when I get time and if that doesn't fix it I will change the wiring in the box.
Avus Avant, RNS-E mk2 with sds and Bluetooth, Milltek, Hotchkis, Bilstein, Forge, ITG, A.C.E, Wagner, FBMFSW, MTM.
Who is online
Users browsing this forum: No registered users and 70 guests