Help required gloss black front bumper insert

[chrisd31]

Hi just wondering if anyone knows where I could get a new black insert for the bottom of my front bumper, mine is cracked so just trying to source second hand rather than dealer ££££££££ TIA

Chris

[MikeFish]

Probably find some on ebay.

[chrisd31]

Few silver ones and 1 black but it’s all scratched

[B-ill]

I have one, PM me or text. 07825664271

Billy

[Shanghara]

TPS sell them.

[adamstocks]

Is this a bumper off job in order to replace this?

[MikeFish]

Is this a bumper off job in order to replace this?

If you are talking about the front splitter then no it's not a bumper off job. Just need to jack the front up a bit, remove the front undertray (screwed on but be careful as you remove it as there is a wire clipped to the front edge of the tray on both sides) , remove the radiator undertray section (just pulls off) then unscrew the splitter. Think there are a few screws from the bottom then a couple at the back of the splitter pointing towards the front of the car.

[adamstocks]

Thanks Mike

[LeeRS6]

Mike do you know how to remove the fins on the bumper, can these be removed without taking the bumper off.

[uplandsway]

Mike do you know how to remove the fins on the bumper, can these be removed without taking the bumper off.

They have the little metal clips on the back of them as far as i know as a few have tried to just wiggle and jiggle off but with no luck.
You need to remove bumper and do it that way..

[MikeFish]

I ended up having to have the bumper removed for those as Stevie said.

[LeeRS6]

Ok thanks, looks like it's bumper off then.