The ones I got from Audi Retrofits https://audi-retrofits.co.uk/ fitted my RS6 very well once I figured out how to dismantle the mirrors. No gaps at all on reassembly.
Mike's Panther RS6 Performance thread
Re: Mike's Panther RS6 Performance thread
David
Re: Mike's Panther RS6 Performance thread
You’re back! Is that you only just finished putting all your toys back in the pramDaveBee wrote: ↑Thu Dec 20, 2018 10:42 pmThe ones I got from Audi Retrofits https://audi-retrofits.co.uk/ fitted my RS6 very well once I figured out how to dismantle the mirrors. No gaps at all on reassembly.
Cheers
Re: Mike's Panther RS6 Performance thread
So you fitted them yourself? And no gaps? Hmmmm. Might have to give them a shout.DaveBee wrote: ↑Thu Dec 20, 2018 10:42 pmThe ones I got from Audi Retrofits https://audi-retrofits.co.uk/ fitted my RS6 very well once I figured out how to dismantle the mirrors. No gaps at all on reassembly.
Re: Mike's Panther RS6 Performance thread
The 6 mirror housing is different to a 7.
Current ride’s
Q7 Floret Silver Black Edition On 22’s (2018)
Renault Clio 172 Cup. (Babe the track pig)
Previous rides
SQ5 Glacier white( 2016 65reg)
RS6 avant C7 Daytona Grey 2015 facelift. The one I waved goodbye to!!
2013: Q7 3.0 tdi s/line plus ibis white (13reg)
2012: S5 cabriolet glacier white (62 reg)
2011: RS4 saloon B7. Avus (57 reg)
Q7 Floret Silver Black Edition On 22’s (2018)
Renault Clio 172 Cup. (Babe the track pig)
Previous rides
SQ5 Glacier white( 2016 65reg)
RS6 avant C7 Daytona Grey 2015 facelift. The one I waved goodbye to!!
2013: Q7 3.0 tdi s/line plus ibis white (13reg)
2012: S5 cabriolet glacier white (62 reg)
2011: RS4 saloon B7. Avus (57 reg)
Re: Mike's Panther RS6 Performance thread
Yes it is, I didn't spot that Rob said it was an RS7. But I'm sure they probably do an A7 version too.
Re: Mike's Panther RS6 Performance thread
Hi Mike,
Which lip spoiler is that please? Is it CF? How easy, or not, to fit?
Thanks,
David
Re: Mike's Panther RS6 Performance thread
It's the 3 piece ProTuning.lv one. And yes it is all carbon fibre.
Fitting was pretty easy once I got round to jacking the front up. You need to remove the front undertray section and drill the spoiler and underside of bumper to bolt it on. I didn't want to drill into my oem carbon lip spoiler though so didn't support the centre section properly but ended up losing the section on the motorway. The beauty of it being 3 piece is that you can just buy the bit you need once you smash it into a kerb etc.
Fitting was pretty easy once I got round to jacking the front up. You need to remove the front undertray section and drill the spoiler and underside of bumper to bolt it on. I didn't want to drill into my oem carbon lip spoiler though so didn't support the centre section properly but ended up losing the section on the motorway. The beauty of it being 3 piece is that you can just buy the bit you need once you smash it into a kerb etc.
Re: Mike's Panther RS6 Performance thread
Mike you don't have to hide in the corner any more
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: Mike's Panther RS6 Performance thread
Tell me about it, good job I've got a good friend who's job it is to remove dents
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: Mike's Panther RS6 Performance thread
That looks seriously menacing Mike.
Re: Mike's Panther RS6 Performance thread
Thanks for the heads up Dave, I've ordered a set for my RS7 PE from Audi RetrofitsDaveBee wrote: ↑Thu Dec 20, 2018 10:42 pmThe ones I got from Audi Retrofits https://audi-retrofits.co.uk/ fitted my RS6 very well once I figured out how to dismantle the mirrors. No gaps at all on reassembly.
CheeRS,
Rob
MY17 Panther Black RS 7 Performance | Black Pack | Carbon Interior | 21" double spoke black wheels with MPS4's Tyres | Parking Pack | Advanced Key with hands free boot opening | Audi Connect | Audi phone box with wireless charging | Audi smartphone interface | Dynamic pack | Feature programing | EM Tuning LED interior light pack | Dynamic Mirror Indicators | Thinkware F800 pro + Rear Dash Cam |
MY17 Panther Black RS 7 Performance | Black Pack | Carbon Interior | 21" double spoke black wheels with MPS4's Tyres | Parking Pack | Advanced Key with hands free boot opening | Audi Connect | Audi phone box with wireless charging | Audi smartphone interface | Dynamic pack | Feature programing | EM Tuning LED interior light pack | Dynamic Mirror Indicators | Thinkware F800 pro + Rear Dash Cam |
Re: Mike's Panther RS6 Performance thread
Let me know how you get on with them please.RobRS wrote: ↑Fri Jan 18, 2019 11:22 amThanks for the heads up Dave, I've ordered a set for my RS7 PE from Audi RetrofitsDaveBee wrote: ↑Thu Dec 20, 2018 10:42 pmThe ones I got from Audi Retrofits https://audi-retrofits.co.uk/ fitted my RS6 very well once I figured out how to dismantle the mirrors. No gaps at all on reassembly.
CheeRS,
Re: Mike's Panther RS6 Performance thread
Looks like they fit OK then Rob. Couldn't see any gaps like I had.RobRS wrote: ↑Fri Jan 18, 2019 11:22 amThanks for the heads up Dave, I've ordered a set for my RS7 PE from Audi RetrofitsDaveBee wrote: ↑Thu Dec 20, 2018 10:42 pmThe ones I got from Audi Retrofits https://audi-retrofits.co.uk/ fitted my RS6 very well once I figured out how to dismantle the mirrors. No gaps at all on reassembly.
CheeRS,
Who is online
Users browsing this forum: No registered users and 49 guests