Charger build thread

Start a topic to show off your car or keep us updated on your journey
Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Charger build thread

Post by Lukes3 » Thu Feb 08, 2018 2:26 pm

DavidRS4 wrote:
Thu Feb 08, 2018 1:34 pm
Hope the paddle isn’t too much of an on/off feel
And me but its the only one i can find that is rated to take the extra power.
I know people say the oem one is ok to a point, but so far mine keeps getting hot if i give it the beans.
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

DavidRS4
4th Gear
Posts: 653
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Charger build thread

Post by DavidRS4 » Thu Feb 08, 2018 5:55 pm

What about the JHM ones?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Charger build thread

Post by Lukes3 » Thu Feb 08, 2018 8:32 pm

They have to work with there flywheel, im not changing the flywheel yet
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Charger build thread

Post by Lukes3 » Mon Mar 05, 2018 12:22 am

Update,
The sachs sintard paddle clutch with the sachs performance pressure plate has been fitted, only drove the car about a mile due to the weather but first thoughts are good, nice an easy on the foot if i didnt tell you it had a performance clutch you wouldn't of known. There is a slight bit of judder when pulling away but it hasnt even bedded in yet so we will see in a few mile.
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

DavidRS4
4th Gear
Posts: 653
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Charger build thread

Post by DavidRS4 » Sat Mar 10, 2018 7:26 pm

Sounds promising.
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

User avatar
andyg72
4th Gear
Posts: 532
Joined: Mon Nov 10, 2014 9:17 pm

Re: Charger build thread

Post by andyg72 » Sun Oct 07, 2018 11:57 pm

Only just read this luke needs more pictures mate
Here’s mine trying to keep him behind :)

Lovely motor Image

Image


Sent from my iPhone using Tapatalk

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Charger build thread

Post by Lukes3 » Mon Oct 08, 2018 10:23 am

Cheers mate, not updated it in awhile.
Only thing done really is changed the aircon pump and new set of spark plugs.
Oh an put a pipe on the water tank to stop water goimg on everything in the engine bay. Was looking a mess
Attachments
118BCDB1-1710-4B09-BD2F-286694AF81E8.jpeg
66CA64BF-2A0E-4A11-9748-165DCBD81147.jpeg
1DC5729E-FBD8-48DB-882F-E0B6D7069F9A.jpeg
59F778AA-67B4-4E06-A828-838E69909EEE.jpeg
6FEF86C8-831F-4042-B9F3-D91B55F24A5D.jpeg
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

DavidRS4
4th Gear
Posts: 653
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Charger build thread

Post by DavidRS4 » Thu Oct 11, 2018 6:19 am

How is the clutch?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Charger build thread

Post by Lukes3 » Thu Oct 11, 2018 9:39 pm

DavidRS4 wrote:
Thu Oct 11, 2018 6:19 am
How is the clutch?
It works great, no slipping at all, can launch the car hard an it will take it, just dont like a judder its got on soft pull off.
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Charger build thread

Post by Lukes3 » Fri Nov 23, 2018 6:40 pm

Update on this.
Had a on going issue with the air in take temp sensor since fitting this kit in march 2017, some times working some times not.
Freeze frame reading -40!?.
Had a word with mrc (doug) about this an they said at the time it wont be a problem with sensor because its a genuine part.
Checked wiring an all is good an done other checks aswell.
Anyway had enough last weekend an striped it down an pulled the “genuine sensor” out, turns out its not genuine!
In all fairness to MRC they didnt know this crap sensor as you will see in pictures was been supplied by TTS. It even had plastic on the terminals of the sensor!
Refitted with a bosch unit an all is well, no fault codes and silly -40 readings.
So just a thing to look out for with anyone else with a tts kit.
Attachments
CFE6777D-0A3A-4103-9A31-1CBF1B16AE86.jpeg
16010CFE-0FDD-4CFE-AFFF-831DD06FAB06.jpeg
740CECEE-EE1F-4937-8B39-A36F7CD4201B.jpeg
4E874CA4-808E-4C2D-8878-27FBA7A1C85D.jpeg
E40A82EC-5D14-480C-97B7-D69F92005C0F.jpeg
3785B481-6E69-4A5D-A2C9-2C7C54D28C74.png
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Charger build thread

Post by Lukes3 » Sun May 26, 2019 7:23 am

New brakes fitted thanks to vagbremtechnic nice bit of kit these are, with ap racing rotors.
Also replaced prop-shaft centre bearing.
Attachments
FA9DDB2F-F2F9-4F91-89FA-3BB99279DD36.jpeg
960871BC-0F3E-40F1-831A-5D9FF72D486F.jpeg
1B730232-8B9F-47FA-8C1C-E4D1EA10B6F7.jpeg
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

User avatar
dhali
4th Gear
Posts: 867
Joined: Sat Oct 02, 2004 7:44 pm

Re: Charger build thread

Post by dhali » Sun May 26, 2019 9:25 am

Excellent build thread .

Lukes3
4th Gear
Posts: 657
Joined: Tue Dec 04, 2012 3:56 pm

Re: Charger build thread

Post by Lukes3 » Sat Aug 03, 2019 9:32 am

Little update
New things going! Write up soon
Attachments
156A2CDB-24B3-4135-A6D7-29AA48EB0AD6.jpeg
D3E0671E-C70C-4F0C-BEF6-7E0548CDAEC1.jpeg
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2

Gone-audi s3 8p stage2+ with loba lo400 turbo.

DavidRS4
4th Gear
Posts: 653
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Charger build thread

Post by DavidRS4 » Tue Aug 20, 2019 5:35 am

It’ll be interesting to see if it makes a difference.
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

DavidRS4
4th Gear
Posts: 653
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: Charger build thread

Post by DavidRS4 » Tue Aug 27, 2019 11:53 am

Any updates?
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads

Post Reply

Return to “Readers' Rides”

Who is online

Users browsing this forum: No registered users and 52 guests