RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Not going to write it out again so here is a link

http://forum.rs246.com/viewtopic.php?f=2&t=90294

Got to log in to read it amanda

dunc

Really ???................just join then

amanda1 wrote:Really ???................just join then

Please make the effort to post it here Amanda.

PhilT wrote:

amanda1 wrote:Really ???................just join then

Please make the effort to post it here Amanda.

Seeing as you asked so nicely David

As some of you lot are aware my torque conver failed. Well while the engine and gearbox were going to be taken out I decided to take advantage and have a few little things done like some preventative mantainance to keep the 6 in the tip top condition she deserves after putting up with my driving style So she was duly packed of to Unit 20 for the much needed work. After what seems like an eternaty I now have her back but with some very nice additions
Loba cams/gaskets
Loba turbo's 650's
Head skim
Wagners
Uprated fuel pump and reg
Silicone hose kit
Rebuilt gearbox
All maintance parts that made sense to change while engine and box were out!!
A Viper custom remap


I will do a full write up in the C5 section with piccies but I would like to give a huge Thank You to Martin and Lee at Unit 20 for all the spannering, expertise and having to put up with me nagging them Si for his input and making me buy them And finally Viper for doing his magic black glove touch over her I now have a C5 RS6 with 950 nm of torque at 3000 rpms( Yes it has been verified) and the first Uk Loba'd C5 RS6.............. C6 boys watch out


http://s514.photobucket.com/album.../?a ... nt=178.mp4

Sweet....now you can torment the minions now...

Write up here

http://forum.rs246.com/viewtopic.php?f=2&t=90294