RS6 wheels
Posted: Thu Dec 17, 2015 11:28 pm
Will RS6 wheels fit RS4's? Sorry if it's a stupid question but if you don't know.
RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community
RS6 wheels
Page 1 of 1
Re: RS6 wheels
Posted: Thu Dec 17, 2015 11:32 pm
Which RS6, which RS4, which wheels?
Re: RS6 wheels
Posted: Thu Dec 17, 2015 11:33 pm
Ha.
Re: RS6 wheels
Posted: Thu Dec 17, 2015 11:39 pm
Sorry, like I said, if you don't knowdoodlebug wrote:Which RS6, which RS4, which wheels?
my RS4 is a 2006 B7 Avant. Not sure on the RS6 but the details of the wheels are : Part Number is 4G9 601 025 N
Offset is 43
20" 8.5J
5 x 112
RS6 wheels
Posted: Fri Dec 18, 2015 1:39 am
Need to check the centre bore as well. B7 RS4 is 57.1mm
You'll need some spacers to get those on, as standard B7 offset is ET29, and most people space out the OEM wheels 8 or 10mm to get them filling the arches right, creating an effective ET21 or 19mm. Therefore, you're looking at approx 20-25mm spacers. At that size I'd recommend H&R Trak+ or similar bolt on type spacers (bolt to the hub with their own small bolts, and then wheels bolt into the spacer).
You'll need some spacers to get those on, as standard B7 offset is ET29, and most people space out the OEM wheels 8 or 10mm to get them filling the arches right, creating an effective ET21 or 19mm. Therefore, you're looking at approx 20-25mm spacers. At that size I'd recommend H&R Trak+ or similar bolt on type spacers (bolt to the hub with their own small bolts, and then wheels bolt into the spacer).
Re: RS6 wheels
Posted: Fri Dec 18, 2015 6:48 am
Don't forget that wheel is also half an inch narrower than the OEM wheel so will be 6mm further in.
FYI I doubt any RS6 came with an 8.5inch wide wheel with an offset of 43, they'd never clear the brake calipers.
FYI I doubt any RS6 came with an 8.5inch wide wheel with an offset of 43, they'd never clear the brake calipers.