Audi rs4 b7 badge sizes ?

All things related to Audi and other manufacturers
Post Reply
Grizwold
1st Gear
Posts: 75
Joined: Sat Aug 13, 2016 10:40 am

Audi rs4 b7 badge sizes ?

Post by Grizwold » Wed Oct 19, 2016 6:04 pm

Lookin at getting replacement black badges
Off ebay about £19 posted .

This is the description with sizes are these ok
For the b7 ?


CUSTOM 'MATT / SATIN BLACK' AUDI FRONT GRILLE & REAR HATCH / BOOT LID BADGES

TRANSFORM THE LOOK OF THE FRONT & REAR OF YOUR VEHICLE FROM STANDARD SILVER BADGE TO CUSTOM MATT BLACK

DIRECT REPLACEMENTS, CLIP OFF THE OLD, CLIP ON THE NEW FOR THE FRONT, SELF ADHESIVE BACKING FOR THE REAR BADGE

SOLID COLOUR (NOT PAINTED) SO WILL NOT FLAKE

LOOKS PARTICULARLY GOOD ON BLACK AND IBIS WHITE VEHICLES

SIZE
273MM X 93MM (FRONT)
180MM X 55MM (REAR)

PLEASE ENSURE SIZE IS CORRECT FOR YOUR APPLICATION PRIOR TO ORDERING, THANK YOU.

INDIVIDUAL ITEMS MAY BE SHIPPED SEPARATELY.

Thanks

User avatar
Covkiller
Top Gear
Posts: 2349
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: Audi rs4 b7 badge sizes ?

Post by Covkiller » Wed Oct 19, 2016 8:50 pm

Get them from Audi
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Audi rs4 b7 badge sizes ?

Post by MikeFish » Wed Oct 19, 2016 9:00 pm

Audi don't sell the black rings which I think is what he is after.

Grizwold
1st Gear
Posts: 75
Joined: Sat Aug 13, 2016 10:40 am

Re: Audi rs4 b7 badge sizes ?

Post by Grizwold » Wed Oct 19, 2016 9:14 pm

As above , yer black rings
I believe some of them are different sizes .
Need to get right size :wink:

Grizwold
1st Gear
Posts: 75
Joined: Sat Aug 13, 2016 10:40 am

Re: Audi rs4 b7 badge sizes ?

Post by Grizwold » Wed Oct 19, 2016 9:16 pm

273MM X 93MM (FRONT)
180MM X 55MM (REAR)

MrHilario
5th Gear
Posts: 1020
Joined: Thu Oct 08, 2015 4:21 pm

Re: Audi rs4 b7 badge sizes ?

Post by MrHilario » Thu Oct 20, 2016 7:14 am

Excuse me for stating the obvious but why not just measure your current ones? :?:
Real name: Simon, or Si, don't mind either

1.4 Fiesta (Silver)
2.8 VW Bora V6 4motion (Blue)
4.2 Audi RS4 B7 Avant (Black)

Harris.
4th Gear
Posts: 731
Joined: Mon Sep 29, 2014 12:27 pm

Re: Audi rs4 b7 badge sizes ?

Post by Harris. » Thu Oct 20, 2016 9:34 am

I got the Black RS4 rear badge off e bay , crap quality and too small so I went to the stealers .

Can you not paint your rings black, simple job

Grizwold
1st Gear
Posts: 75
Joined: Sat Aug 13, 2016 10:40 am

Re: Audi rs4 b7 badge sizes ?

Post by Grizwold » Thu Oct 20, 2016 6:01 pm

Trouble with eBay sizes there not spot on
Example rear depth is 58mm
eBay says 55mm ?
So it looks like there too small by a mm or two
But advertised as b7 rings .
Might take a punt there only £19
By the time I buy primer & black paint
That'll be about 14 quid :?:

Harris.
4th Gear
Posts: 731
Joined: Mon Sep 29, 2014 12:27 pm

Re: Audi rs4 b7 badge sizes ?

Post by Harris. » Fri Oct 21, 2016 1:37 pm

https://www.prodip.eu/Plasti-Dip-Spray- ... 0wod-uoMbw

Less than £10 , no primer needed ,I got mine from Halfords and its stuck well and so easy to use .

Post Reply

Return to “General Car Chat”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 109 guests