Rs4 b7 wheel spacers

Post by **Cheeko** » Tue Dec 01, 2015 9:06 pm

Hi folks . Im looking in buying some wheel spacers for my audi rs4 b7 .
After looking i can only find h&r are selling hubcentric 8mm ones which i was thinking for fronts & 10mm for the back .
Has any1 used these ! Are they ok . Just as i read up 1 guy with these was getting vibrations from them !! Thanks

Post by **RS04YOB** » Wed Dec 02, 2015 10:53 am

I used 10 all round they where fine

Post by **MikeFish** » Wed Dec 02, 2015 2:22 pm

There are so many different variations of H&R spacers (variations of flange size and angle etc) that you need to be careful you get the right ones.
If you use one of the normal routes to get them that are famiar with the car you will be fine. Loads of members here use them.
I'd stick to either Revolution or Virdee for spacers.

Post by **toyneg** » Wed Dec 02, 2015 3:06 pm

I had wheel vibration using h&r 8mm ones up front but that was more the face of the hub on my wheel not being 100% flat after a refurb
i now just have 10mm on the back

Post by **Cheeko** » Fri Dec 04, 2015 6:21 pm

Cheers for reply's lads.
I was asked today to measure how far the rear hub sticks out on my rs4 b7 to see if these h&r 10mm hub centric spacers would work . The measurment i got was 13mm . So been told these spacers will be no good . I see loads use 10mm spacers on rear wheels . Do i need a different type or sumthing . Just getting confussed just now !!!

Post by **marc1** » Fri Dec 04, 2015 7:45 pm

Loads of people run spacers on the B7's. They range from 8mm to 12mm front and rear, so can't see any issue with 10mm spacers (unless you are running different wheels with a weird offset). Speak to Virdee autos (site Sponsor) for a hassle free spacer purchase.

Post by **Virdee Autos** » Fri Dec 04, 2015 8:03 pm

Marc1 cheers for the kind words

Yes always in stock. Drop me a PM or line on the number below if your still after some

Post by **MikeFish** » Fri Dec 04, 2015 9:06 pm

Virdee Autos wrote:Marc1 cheers for the kind words

Ahem!....

MikeFish wrote:
I'd stick to either Revolution or Virdee for spacers.

Post by **marc1** » Fri Dec 04, 2015 9:50 pm

Lol, didn't see your earlier post Mike.

Post by **ASC** » Sat Dec 05, 2015 12:07 am

Just don't go too low and you should be Ok!

Post by **MikeFish** » Sat Dec 05, 2015 12:07 am

marc1 wrote:Lol, didn't see your earlier post Mike.

Lol I was just kidding but that was aimed at virdee for thanking you but not me.

Post by **Virdee Autos** » Sat Dec 05, 2015 12:16 am

MikeFish wrote:
marc1 wrote:Lol, didn't see your earlier post Mike.
Lol I was just kidding but that was aimed at virdee for thanking you but not me.

Credit where it's due MikeFish - thanks mate! (smacks hand on head) must read full thread next time!!!

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Rs4 b7 wheel spacers

Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Re: Rs4 b7 wheel spacers

Who is online