Page 1 of 1
Help required gloss black front bumper insert
Posted: Thu Apr 11, 2019 12:04 pm
by chrisd31
Hi just wondering if anyone knows where I could get a new black insert for the bottom of my front bumper, mine is cracked so just trying to source second hand rather than dealer ££££££££ TIA
Chris
Re: Help required gloss black front bumper insert
Posted: Thu Apr 11, 2019 12:42 pm
by MikeFish
Probably find some on ebay.
Re: Help required gloss black front bumper insert
Posted: Thu Apr 11, 2019 3:19 pm
by chrisd31
Few silver ones and 1 black but it’s all scratched
Re: Help required gloss black front bumper insert
Posted: Fri Apr 12, 2019 3:45 pm
by B-ill
I have one, PM me or text. 07825664271
Billy
Re: Help required gloss black front bumper insert
Posted: Wed May 15, 2019 3:04 pm
by Shanghara
TPS sell them.
Re: Help required gloss black front bumper insert
Posted: Fri May 17, 2019 10:04 am
by adamstocks
Is this a bumper off job in order to replace this?
Re: Help required gloss black front bumper insert
Posted: Sat May 18, 2019 1:02 am
by MikeFish
adamstocks wrote: ↑Fri May 17, 2019 10:04 am
Is this a bumper off job in order to replace this?
If you are talking about the front splitter then no it's not a bumper off job. Just need to jack the front up a bit, remove the front undertray (screwed on but be careful as you remove it as there is a wire clipped to the front edge of the tray on both sides) , remove the radiator undertray section (just pulls off) then unscrew the splitter. Think there are a few screws from the bottom then a couple at the back of the splitter pointing towards the front of the car.
Re: Help required gloss black front bumper insert
Posted: Mon May 20, 2019 8:05 am
by adamstocks
Thanks Mike
Re: Help required gloss black front bumper insert
Posted: Tue May 21, 2019 11:04 am
by LeeRS6
Mike do you know how to remove the fins on the bumper, can these be removed without taking the bumper off.
Re: Help required gloss black front bumper insert
Posted: Tue May 21, 2019 11:35 am
by uplandsway
LeeRS6 wrote: ↑Tue May 21, 2019 11:04 am
Mike do you know how to remove the fins on the bumper, can these be removed without taking the bumper off.
They have the little metal clips on the back of them as far as i know as a few have tried to just wiggle and jiggle off but with no luck.
You need to remove bumper and do it that way..
Re: Help required gloss black front bumper insert
Posted: Tue May 21, 2019 7:19 pm
by MikeFish
I ended up having to have the bumper removed for those as Stevie said.
Re: Help required gloss black front bumper insert
Posted: Wed May 22, 2019 8:06 am
by LeeRS6
Ok thanks, looks like it's bumper off then.