Friday Brake Porn! RB Racing Discs
- Toffeebananas
- 1st Gear
- Posts: 85
- Joined: Tue Oct 16, 2018 2:20 am
Friday Brake Porn! RB Racing Discs
Finally got round to fitting the new brakes! Bells and Rotors, cross drilled. Larger 410 discs on the front using spacers on the calipers. Brembo Pads all round.
Big thanks, to Jamie at RB Racing for supply of the discs , MikeFish for sorting me a good deal , and LeeRS6 for pointing me in the right direction for some good priced front Brembo pads
Still bedding the discs and pads in so can’t comment on performance.
Fitting of discs and pads was all straight forward, and no Vagcom was needed. (Unbolted the rear handbrake motors to do the rears).
Big thanks, to Jamie at RB Racing for supply of the discs , MikeFish for sorting me a good deal , and LeeRS6 for pointing me in the right direction for some good priced front Brembo pads
Still bedding the discs and pads in so can’t comment on performance.
Fitting of discs and pads was all straight forward, and no Vagcom was needed. (Unbolted the rear handbrake motors to do the rears).
Re: Friday Brake Porn! RB Racing Discs
They certainly look the part, will be very interested to see if there's much difference in performance.
- uplandsway
- 3rd Gear
- Posts: 388
- Joined: Tue Sep 04, 2018 3:32 pm
Re: Friday Brake Porn! RB Racing Discs
Looks nice but Pirelli’sToffeebananas wrote:Finally got round to fitting the new brakes! Bells and Rotors, cross drilled. Larger 410 discs on the front using spacers on the calipers. Brembo Pads all round.
Big thanks, to Jamie at RB Racing for supply of the discs , MikeFish for sorting me a good deal , and LeeRS6 for pointing me in the right direction for some good priced front Brembo pads
Still bedding the discs and pads in so can’t comment on performance.
Fitting of discs and pads was all straight forward, and no Vagcom was needed. (Unbolted the rear handbrake motors to do the rears).
Sent from my iPhone using Tapatalk
Cheers,
Stevie F
2016 C7.5 RS6 Performance
Stevie F
2016 C7.5 RS6 Performance
- Toffeebananas
- 1st Gear
- Posts: 85
- Joined: Tue Oct 16, 2018 2:20 am
Re: Friday Brake Porn! RB Racing Discs
Pirelli’s!!!!!! I know! I read loads of poor feedback, and I even had the inside blow out on my old Pirelli’s! But I still bought another set!
I like the sidewall profile!!!!! Shocking I know! But saying that, I can’t really put the performance of these down. Running 680BHP and they grip! Yes if it’s wet or damp they don’t grip too good then, but surely what does?
I haven’t tried the Mitchelins everyone raves about. May be I be tempted on the next time
Got to admit the side wall is pretty though!!!???
I like the sidewall profile!!!!! Shocking I know! But saying that, I can’t really put the performance of these down. Running 680BHP and they grip! Yes if it’s wet or damp they don’t grip too good then, but surely what does?
I haven’t tried the Mitchelins everyone raves about. May be I be tempted on the next time
Got to admit the side wall is pretty though!!!???
- uplandsway
- 3rd Gear
- Posts: 388
- Joined: Tue Sep 04, 2018 3:32 pm
Re: Friday Brake Porn! RB Racing Discs
Hi matey,Toffeebananas wrote:Finally got round to fitting the new brakes! Bells and Rotors, cross drilled. Larger 410 discs on the front using spacers on the calipers. Brembo Pads all round.
Big thanks, to Jamie at RB Racing for supply of the discs , MikeFish for sorting me a good deal , and LeeRS6 for pointing me in the right direction for some good priced front Brembo pads
Still bedding the discs and pads in so can’t comment on performance.
Fitting of discs and pads was all straight forward, and no Vagcom was needed. (Unbolted the rear handbrake motors to do the rears).
How are you getting on with this set up?, more interested in the discs to be fair as will be going pagid or ferodo for pads as the OE Stuff even Brembo doesn’t cut it for me...
Sent from my iPhone using Tapatalk
Cheers,
Stevie F
2016 C7.5 RS6 Performance
Stevie F
2016 C7.5 RS6 Performance
Re: Friday Brake Porn! RB Racing Discs
That is impressive. Interested to see what the durability and resistance to warp is, wonder if there is any play in the calliper under full braking with the spacers.
Are we allowed to ask how expensive?
Are we allowed to ask how expensive?
Re: Friday Brake Porn! RB Racing Discs
Why are there spacers on the calipers?
No matter where you go, there you are.
Re: Friday Brake Porn! RB Racing Discs
More of an adapter bracket than a spacer.
Re: Friday Brake Porn! RB Racing Discs
Ah, got it. So not a whole new bracket?
No matter where you go, there you are.
Re: Friday Brake Porn! RB Racing Discs
No I don't think so. Seem to recall just a small adapter. Can't find a photo of it now.
-
- 4th Gear
- Posts: 565
- Joined: Fri May 25, 2018 4:53 pm
Re: Friday Brake Porn! RB Racing Discs
I think you just use long calliper mounting bolts plus the spacers to move the callipers.
The spacers probably aren't exactly 10mm because of the geometry.
It's a mod I did on another car. It took a bit of iteration, but it turned out to be very effective.
You can only do it this way, using spacers instead of brackets, if the calliper mounting bolts are longitudinal rather than transverse. The vast majority are transverse.
Nick
The spacers probably aren't exactly 10mm because of the geometry.
It's a mod I did on another car. It took a bit of iteration, but it turned out to be very effective.
You can only do it this way, using spacers instead of brackets, if the calliper mounting bolts are longitudinal rather than transverse. The vast majority are transverse.
Nick
- uplandsway
- 3rd Gear
- Posts: 388
- Joined: Tue Sep 04, 2018 3:32 pm
Re: Friday Brake Porn! RB Racing Discs
How is your brake set holding up as interested to hear your thoughts on the bigger brake set upToffeebananas wrote: ↑Fri Mar 22, 2019 3:06 pmFinally got round to fitting the new brakes! Bells and Rotors, cross drilled. Larger 410 discs on the front using spacers on the calipers. Brembo Pads all round.
Big thanks, to Jamie at RB Racing for supply of the discs , MikeFish for sorting me a good deal , and LeeRS6 for pointing me in the right direction for some good priced front Brembo pads
Still bedding the discs and pads in so can’t comment on performance.
Fitting of discs and pads was all straight forward, and no Vagcom was needed. (Unbolted the rear handbrake motors to do the rears).
cheers!
Cheers,
Stevie F
2016 C7.5 RS6 Performance
Stevie F
2016 C7.5 RS6 Performance
Who is online
Users browsing this forum: No registered users and 99 guests