Milltek Road+ Fitted

4.0 V8 40v biturbo TFSI - 553 bhp
4.0 V8 40v biturbo TFSI - 597 bhp (Performance)
Post Reply
Boyakasha
1st Gear
Posts: 62
Joined: Mon May 16, 2016 7:08 pm

Milltek Road+ Fitted

Post by Boyakasha » Thu Jan 17, 2019 11:57 pm

Hi folks, had my Milltek Road+ fitted today and loving the new exhaust note. Also got my pitted exhaust tips changed for ones I had powder coated, looks so much better and at least theses will last. There were a couple of question I had regarding the Milltek and the valves.

First thing I thought was the back boxes came with new valve motors, but I was told that they don’t come with these and it’s a case of just swapping the original motors onto the Milltek back boxes?

Second one is if you’re in Dynamic are the valves open all the time or do they only open fully over 3k rpm?

Thanks

Marc

User avatar
bn8959
3rd Gear
Posts: 368
Joined: Sun Nov 02, 2008 10:34 pm

Re: Milltek Road+ Fitted

Post by bn8959 » Fri Jan 18, 2019 8:41 am

A Milltek should come with its own valves. Mine certainly did. I believe the Akra dosent and needs the OEM ones moving over.
2016 C7 RS6 - Panther Black
Previous:
2008 B7 RS4 Avant, Phantom Black

Boyakasha
1st Gear
Posts: 62
Joined: Mon May 16, 2016 7:08 pm

Re: Milltek Road+ Fitted

Post by Boyakasha » Fri Jan 18, 2019 1:41 pm

Turns out Miltek did not supply the valve motors so are sending new ones out. At least I’ll now have a new set of spare motors.

Tadass910
5th Gear
Posts: 1281
Joined: Fri Nov 11, 2016 8:39 pm

Re: Milltek Road+ Fitted

Post by Tadass910 » Mon Mar 25, 2019 6:12 pm

Boyakasha wrote:
Thu Jan 17, 2019 11:57 pm
Hi folks, had my Milltek Road+ fitted today and loving the new exhaust note. Also got my pitted exhaust tips changed for ones I had powder coated, looks so much better and at least theses will last. There were a couple of question I had regarding the Milltek and the valves.

First thing I thought was the back boxes came with new valve motors, but I was told that they don’t come with these and it’s a case of just swapping the original motors onto the Milltek back boxes?

Second one is if you’re in Dynamic are the valves open all the time or do they only open fully over 3k rpm?

Thanks

Marc
Road Miltek waste of money, then put Audi sport exhaust ant it will sound the same, what is changing a tone is Miltek none resonated exhaust

Post Reply

Return to “RS6 (C7 Typ 4G) 2013-2018”

Who is online

Users browsing this forum: No registered users and 139 guests