Any final comments prior to non-res Miltek?

4.0 V8 40v biturbo TFSI - 553 bhp
4.0 V8 40v biturbo TFSI - 597 bhp (Performance)
Post Reply
2Brains
Neutral
Posts: 43
Joined: Sat Oct 06, 2018 11:42 am

Any final comments prior to non-res Miltek?

Post by 2Brains » Sun Jan 13, 2019 11:58 pm

Evening all,

Well I’ve had my RS6 for around 3 months and having had a ‘loan’ of a previously modded example with 720bhp and an aftermarket exhaust (assuming Miltek) I’m about to make the jump to a non-resonated Miltek cat back.

The question is, should I be aware of or consider anything before I do?
The last RS6 had a report of a leaking exhaust when it was in at Audi.Is this a common issue or something to be concerned with? I always assumed Miltek was a solid make/brand?

I’ve still got the Audi warranty and just plan on swapping back to the Audi exhaust whenever I have a service or warranty claim coming up (until I extend at which point I’ll likely just declare it).

Cheers to any input.
Edinburgh Based Nardo Grey C7 RS6

DanM92
Neutral
Posts: 26
Joined: Thu Jan 03, 2019 10:55 am

Re: Any final comments prior to non-res Miltek?

Post by DanM92 » Mon Jan 14, 2019 12:32 pm

I am in the exactly same boat as you are but only owned by RS6 for 2 weeks.
I have asked two different Audi garages and they both said you should be okay for warranty claims as its just a catback (the full system may be different).
Have you seen any videos of the C7 RS6 using just the Miltek non-res catback and not the full system?
Current Cars
Audi RS6 C7
R129 500SL
W124 300CE Mosselman Twin Turbo
W210 E55 AMG
W210 E320 CDI

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Any final comments prior to non-res Miltek?

Post by MikeFish » Mon Jan 14, 2019 2:27 pm

Leaking exhaust if probably down to clamps not being tight enough and or no exhaust paste used. Either way it's not a big deal.
Most people on here would consider the milltek to be of poor build quality especially when compare to the £7k Akrapovic (not really a fair comparison).
Some people have a knocking noise with the milltek. Mine does but when I can be bothered to grt under the car and tweak the position slitghly I'm sure that will cure it.
But given all the above I'd still highly recommend it.
Before fitting mine I had my front and centre resonators deleted and gave me a near perfect sound for just a few hundred quid. It stayed like that for nearly 3 years before I got bored and found a cheap milltek.
Some people find it too loud too but it sounds like you have heard it already and like it so you know what to expect there.

2Brains
Neutral
Posts: 43
Joined: Sat Oct 06, 2018 11:42 am

Re: Any final comments prior to non-res Miltek?

Post by 2Brains » Mon Jan 14, 2019 2:34 pm

DanM92 wrote:
Mon Jan 14, 2019 12:32 pm
I am in the exactly same boat as you are but only owned by RS6 for 2 weeks.
I have asked two different Audi garages and they both said you should be okay for warranty claims as its just a catback (the full system may be different).
Have you seen any videos of the C7 RS6 using just the Miltek non-res catback and not the full system?
That’s my hope too, just fearing meeting my match in the ultimate jobsworth Master Tech 🙈. Yeah seen some videos and they seems pretty amazing. I don’t know for sure what my original car was - I’d assume downpipes too if it was mapped so hopefully the cat back doesn’t disappoint!
MikeFish wrote:
Mon Jan 14, 2019 2:27 pm
Leaking exhaust if probably down to clamps not being tight enough and or no exhaust paste used. Either way it's not a big deal.
Most people on here would consider the milltek to be of poor build quality especially when compare to the £7k Akrapovic (not really a fair comparison).
Some people have a knocking noise with the milltek. Mine does but when I can be bothered to grt under the car and tweak the position slitghly I'm sure that will cure it.
But given all the above I'd still highly recommend it.
Before fitting mine I had my front and centre resonators deleted and gave me a near perfect sound for just a few hundred quid. It stayed like that for nearly 3 years before I got bored and found a cheap milltek.
Some people find it too loud too but it sounds like you have heard it already and like it so you know what to expect there.
Thanks Mike. I’ve never understood how an exhaust made of what they claim to be aviation grade steel can be that bad though - I’m sure it will do the job or certainly not cause me any real grief anyway! The car definitely needs the theatrics and I certainly miss the burble, pops and bangs on demand.
Edinburgh Based Nardo Grey C7 RS6

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Any final comments prior to non-res Miltek?

Post by MikeFish » Mon Jan 14, 2019 4:57 pm

If the car only had 720ps I'd assume it was a cat back only.

User avatar
uplandsway
3rd Gear
Posts: 388
Joined: Tue Sep 04, 2018 3:32 pm

Re: Any final comments prior to non-res Miltek?

Post by uplandsway » Mon Jan 14, 2019 5:30 pm

APR are due to release a sports exhaust..just for thought.
Cheers,
Stevie F
2016 C7.5 RS6 Performance

nuwanda
2nd Gear
Posts: 129
Joined: Tue Apr 15, 2014 10:47 am
Location: Hong Kong

Re: Any final comments prior to non-res Miltek?

Post by nuwanda » Tue Jan 15, 2019 9:27 am

Poorly built. I had it on then switched to Capristo. Night and Day.
Mazda Eunos 800M, Mazda Tribute 3.0, Toyota Harrier 2.4, Lexus IS250 Deluxe, Audi Q7 3.6, Golf MKV R32, Audi MK2 TT 3.2, BMW X1 xDrive25i, Audi S5 Sportback, MB C63 Estate, Audi RS6

User avatar
Paulm
Top Gear
Posts: 1661
Joined: Tue Jan 06, 2004 12:23 pm
Location: Aberdeenshire

Re: Any final comments prior to non-res Miltek?

Post by Paulm » Tue Jan 15, 2019 10:35 am

I have one on my RS7 sound amazing. Quiet on a run as well.
BMW 540i
2018 GTR
F90 M5
X3MC
RS3 Saloon
RS7 FL best car I've owned. No faith in turbo oil screen (turbos failing) or sticking oil scraper ring causing missfires.
F10 M5 LCI still no rear grip lol
S7 black Edition Too big and heavy
S3 8V FL DSG 310ps, road noise is a joke
RS3 8P Rubbish
C7 RS6 Fantastic car but missed playing
GTR R35 800bhp, too extreme, crazy fast though
911 Turbo Remapped. Hated it
F10 M5, awesome but no rear grip
RS6 V10 700BHP crazy
Porsche Cayenne Turbo S 600bhp

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Any final comments prior to non-res Miltek?

Post by MikeFish » Tue Jan 15, 2019 11:26 am

nuwanda wrote:
Tue Jan 15, 2019 9:27 am
Poorly built. I had it on then switched to Capristo. Night and Day.
What was wrong with it that made you change exhaust? I understand it rusts but no one can see it under the car.

2Brains
Neutral
Posts: 43
Joined: Sat Oct 06, 2018 11:42 am

Re: Any final comments prior to non-res Miltek?

Post by 2Brains » Tue Jan 15, 2019 5:59 pm

MikeFish wrote:
Tue Jan 15, 2019 11:26 am
nuwanda wrote:
Tue Jan 15, 2019 9:27 am
Poorly built. I had it on then switched to Capristo. Night and Day.
What was wrong with it that made you change exhaust? I understand it rusts but no one can see it under the car.
Would be good to know the details of your experience with Miltek and also what kind of duration we’re talking before you started to see issues?

Thanks
Edinburgh Based Nardo Grey C7 RS6

Tadass910
5th Gear
Posts: 1280
Joined: Fri Nov 11, 2016 8:39 pm

Re: Any final comments prior to non-res Miltek?

Post by Tadass910 » Wed Jan 16, 2019 5:29 pm

Miltek none resonated exhaust only no other even looked for when considering buying, have it for 2 years no problems so far, sounds amazing and brutal. Sometimes exhaust valve flaps stucks or maybe a little rust spraying wd40 helps)

2Brains
Neutral
Posts: 43
Joined: Sat Oct 06, 2018 11:42 am

Re: Any final comments prior to non-res Miltek?

Post by 2Brains » Thu Jan 17, 2019 5:54 pm

Tadass910 wrote:
Wed Jan 16, 2019 5:29 pm
Miltek none resonated exhaust only no other even looked for when considering buying, have it for 2 years no problems so far, sounds amazing and brutal. Sometimes exhaust valve flaps stucks or maybe a little rust spraying wd40 helps)
Thanks Tadass. It was fitted today; picked her up and it’s basically indescribable. The most glorious and brutal thing I’ve ever heard. Spoiled without it!
Last edited by 2Brains on Thu Jan 17, 2019 10:49 pm, edited 1 time in total.
Edinburgh Based Nardo Grey C7 RS6

User avatar
bn8959
3rd Gear
Posts: 368
Joined: Sun Nov 02, 2008 10:34 pm

Re: Any final comments prior to non-res Miltek?

Post by bn8959 » Thu Jan 17, 2019 6:06 pm

I had a Milltek on my RS4 for 9 years with no issues at all!
2016 C7 RS6 - Panther Black
Previous:
2008 B7 RS4 Avant, Phantom Black

Post Reply

Return to “RS6 (C7 Typ 4G) 2013-2018”

Who is online

Users browsing this forum: No registered users and 87 guests