Standard steel discs and pads.. How long should they last?

4.0 V8 40v biturbo TFSI - 553 bhp
4.0 V8 40v biturbo TFSI - 597 bhp (Performance)
chandler99
2nd Gear
Posts: 156
Joined: Mon Apr 18, 2016 12:17 pm

Standard steel discs and pads.. How long should they last?

Post by chandler99 » Fri Dec 28, 2018 5:39 pm

Hi guys,

just trying to gauge but does anyone know how long standard steel (wavey) and standard pads should last on a 2015 RS6? Specifically the pads...

Cheers :beerchug:

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Standard steel discs and pads.. How long should they last?

Post by MikeFish » Fri Dec 28, 2018 8:18 pm

I changed my front pads at about 20-25k.
My rear set need changing now at 30k. Think I'll have to change rear discs too as don't think they will last another 30k.

User avatar
Iain
4th Gear
Posts: 813
Joined: Tue Jan 14, 2003 5:13 pm
Location: Cardiff

Re: Standard steel discs and pads.. How long should they last?

Post by Iain » Sat Dec 29, 2018 11:30 am

I got 23k miles out of my front discs and pads - 2015 6

Was 65% worn rear pads at 39k miles when I sold it.
2018 Brabus G63 Widestar
2017 RS6 PE -Nardo, Air, HUD, Pan.....Millie Non Res
2015 RS6 - with Added Milltek
2015 RRS - utter sh1te
2010 X5 4.0D M Sport Every conceivable extra
2010 X5 4.0D M Sport
2009 R8 V10 Manual
2004 Lambo Gallarado Manual
3 x 997 C4S / C2s
2003 Fezza 360 Spider - Airfix kit build quality
2007 M3 - car number 2 in the UK
2006 RS4 Avant
2000 RS4 MTM Stage 3 - R55 BYE
2001 RS4 - R500 FOR
1990 Dimma Cosworth H20 COS
2003 996 DMS Turbo
multiple 205's Dimmas

Holmsfree
1st Gear
Posts: 87
Joined: Thu May 31, 2018 4:03 pm

Re: Standard steel discs and pads.. How long should they last?

Post by Holmsfree » Fri Apr 26, 2019 12:15 pm

Mike will love me digging out an old thread through shameless self interest.....Image
My RS6PE is with Reading Audi right now having a brake grabbing issue investigated.
Having found nothing wrong with braking system (as expected), they’ve pointed out my discs and pads are 75% worn and I should consider replacing pads and discs, front and back.
Couple of things:
• The car has done 29k miles, 9k of which with me since buying from Southampton Audi in July ‘18.
• My miles are mainly motorway with the odd, good spank in between. Discs at this mileage seems unusual to me
• Car under warranty until end of ‘19.
• Prices are £1458.92 and £1777.93 for front and back respectively which seems stiff.

I’m inclined to go to an indie when the time comes assuming I’m out of warranty. I’m in Berkshire area btw if any good specialists come to mind.

Any guidance/thoughts appreciated.
18080 2.jpg
ImageImageImage

Cheers


Sent from my iPad using Tapatalk
RS6 Performance Edition - Daytona Grey - 2016
Golf R - Deep Black - 5 door, DSG - 2016
X5 40d - Sapphire Black, 7 seats - 2011
VFR800F - Silver - 1997. In many years, only miles is to and from the MOT centre

gsc
2nd Gear
Posts: 228
Joined: Fri Apr 21, 2017 1:24 pm

Re: Standard steel discs and pads.. How long should they last?

Post by gsc » Fri Apr 26, 2019 12:24 pm

2015 RS7 with 75k on the clock, ceramic disks are less than 20% worn, pads are 50% worn.

If you’re keeping the car a while, who says ceramics aren’t worth it?


Sent from my iPad using Tapatalk

Holmsfree
1st Gear
Posts: 87
Joined: Thu May 31, 2018 4:03 pm

Re: Standard steel discs and pads.. How long should they last?

Post by Holmsfree » Fri Apr 26, 2019 12:45 pm

That is an interesting benchmark for sure. Hadn't even considered that. Cheers
RS6 Performance Edition - Daytona Grey - 2016
Golf R - Deep Black - 5 door, DSG - 2016
X5 40d - Sapphire Black, 7 seats - 2011
VFR800F - Silver - 1997. In many years, only miles is to and from the MOT centre

LeeRS6
2nd Gear
Posts: 129
Joined: Thu Aug 10, 2017 1:07 pm

Re: Standard steel discs and pads.. How long should they last?

Post by LeeRS6 » Fri Apr 26, 2019 2:53 pm

Those pads look only 50% worn at max, they don't have tonnes on to start with.

Holmsfree
1st Gear
Posts: 87
Joined: Thu May 31, 2018 4:03 pm

Re: Standard steel discs and pads.. How long should they last?

Post by Holmsfree » Fri Apr 26, 2019 3:44 pm

Thanks LeeRS6, really helpful. I’m not at all technically minded so I’m ripe for being ripped off!!


Sent from my iPad using Tapatalk
RS6 Performance Edition - Daytona Grey - 2016
Golf R - Deep Black - 5 door, DSG - 2016
X5 40d - Sapphire Black, 7 seats - 2011
VFR800F - Silver - 1997. In many years, only miles is to and from the MOT centre

User avatar
R33
4th Gear
Posts: 781
Joined: Mon Jan 18, 2010 1:24 pm

Re: Standard steel discs and pads.. How long should they last?

Post by R33 » Fri Apr 26, 2019 5:00 pm

Holmsfree wrote:
Fri Apr 26, 2019 12:15 pm
Mike will love me digging out an old thread through shameless self interest.....Image
My RS6PE is with Reading Audi right now having a brake grabbing issue investigated.
Having found nothing wrong with braking system (as expected), they’ve pointed out my discs and pads are 75% worn and I should consider replacing pads and discs, front and back.
Couple of things:
• The car has done 29k miles, 9k of which with me since buying from Southampton Audi in July ‘18.
• My miles are mainly motorway with the odd, good spank in between. Discs at this mileage seems unusual to me
• Car under warranty until end of ‘19.
• Prices are £1458.92 and £1777.93 for front and back respectively which seems stiff.

I’m inclined to go to an indie when the time comes assuming I’m out of warranty. I’m in Berkshire area btw if any good specialists come to mind.

Any guidance/thoughts appreciated.18080 2.jpgImageImageImage

Cheers


Sent from my iPad using Tapatalk

2+ Tonne car, 560-700bhp+ mostly driven by enthusiastic drivers, I’d say 20k is pretty reasonable personally ;)

wildbore
4th Gear
Posts: 657
Joined: Fri Mar 21, 2014 6:29 pm
Location: Surrey

Re: Standard steel discs and pads.. How long should they last?

Post by wildbore » Fri Apr 26, 2019 5:08 pm

I drive like an absolute nun - hardly ever get to push the car (I live in Surrey - you are only as fast as he car in front, or the one in front of that, or the one in front...). Plus, I would say that I do 90-95% of my miles on the motorway. The car needed four discs and pads all round at 28000 miles. The rear pads were 60% worn but the discs were shagged due to a lack of use.

It sorted out the vibration, of course, which was due to a lack of occasional, hard braking. I note that is gradually coming back, 10,000 miles into the new set.

Holmsfree
1st Gear
Posts: 87
Joined: Thu May 31, 2018 4:03 pm

Re: Standard steel discs and pads.. How long should they last?

Post by Holmsfree » Fri Apr 26, 2019 5:27 pm

That sounds eerily familiar. Any pushing of the car tends to be planned road trips or sporadic. Cheers

Sent from my SM-G935F using Tapatalk

RS6 Performance Edition - Daytona Grey - 2016
Golf R - Deep Black - 5 door, DSG - 2016
X5 40d - Sapphire Black, 7 seats - 2011
VFR800F - Silver - 1997. In many years, only miles is to and from the MOT centre

morski
3rd Gear
Posts: 370
Joined: Thu May 29, 2014 1:46 pm

Re: Standard steel discs and pads.. How long should they last?

Post by morski » Fri Apr 26, 2019 5:30 pm

Rs6 pads only have about 17mm of meat on them so its not that much in the first place.

@holmsfree did they provide you with disc thickness measurements? Its usually the best way to work out how worn they are as they have the min thickness printed on the disc
RS6 Performance Ascari Blue, Carbon Ceramics & Lots more..
A6 BiTdi Avant
Retrofitted: Full Led Headlights, DAB, Full Electric Seats, Power Tailgate, Surround View Cameras, Genuine RS6 Grille, Leather Door Armrests, Soft Close Doors, Rear Side Blinds, Electric Steering Column, LED Sill Plates, Ambient Lighting Pack, High Beam Assist, Eibach Springs, Led Roof Console, 4 Zone Climate, Rear Heated Seats, Head Up Display, Side assist, Alcantara Retrim

Holmsfree
1st Gear
Posts: 87
Joined: Thu May 31, 2018 4:03 pm

Re: Standard steel discs and pads.. How long should they last?

Post by Holmsfree » Fri Apr 26, 2019 5:30 pm

And thinking harder about it, of my ~9k miles, I can account for most of them on trips to Spain, France and Scotland.
Maybe need to use more often and harder at home. Cheers

Sent from my SM-G935F using Tapatalk

RS6 Performance Edition - Daytona Grey - 2016
Golf R - Deep Black - 5 door, DSG - 2016
X5 40d - Sapphire Black, 7 seats - 2011
VFR800F - Silver - 1997. In many years, only miles is to and from the MOT centre

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Standard steel discs and pads.. How long should they last?

Post by MikeFish » Fri Apr 26, 2019 7:46 pm

29k is not unreasonable for these cars. I recalll some changing them at about 20k or less.

And this thread is only a few months old so dig away.

Holmsfree
1st Gear
Posts: 87
Joined: Thu May 31, 2018 4:03 pm

Re: Standard steel discs and pads.. How long should they last?

Post by Holmsfree » Fri Apr 26, 2019 9:24 pm

Thanks Morski. "75% worn as measured with a Vernier gauge" is all the details I have beyond the photos.

Sent from my SM-G935F using Tapatalk

RS6 Performance Edition - Daytona Grey - 2016
Golf R - Deep Black - 5 door, DSG - 2016
X5 40d - Sapphire Black, 7 seats - 2011
VFR800F - Silver - 1997. In many years, only miles is to and from the MOT centre

Post Reply

Return to “RS6 (C7 Typ 4G) 2013-2018”

Who is online

Users browsing this forum: Bing [Bot] and 50 guests