Hi guys my propshaft centre bearing gone...Have anyone experience this before ? Here is the link
https://youtu.be/BPVfhKfha6Y
RS6 C7 Propshaft Hanger Bearing failed
Re: RS6 C7 Propshaft Hanger Bearing failed
Had exactly the same on my C6 (even did the same video) but that was a 85k mile 8 year old car so I'm extremely surprised a C7 has had that failure already.
Mine cost around £1600 to replace inc Labour but my 3rd party warranty covered it.
Mine cost around £1600 to replace inc Labour but my 3rd party warranty covered it.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
- feeltheburn
- 2nd Gear
- Posts: 246
- Joined: Tue May 27, 2014 6:32 pm
Re: RS6 C7 Propshaft Hanger Bearing failed
No issues on the C7 that I have heard of. How many miles has the car done? Has it ever been tracked? Were there any tell tale signs to look out for (noise/vibration i guess?).
Hope the repair is covered by warranty! Good Luck!
Hope the repair is covered by warranty! Good Luck!
RS6 C7 (2014), Daytona Pearl, 21" Titanium, On Air, LEDs, Sports Exhaust, Dynamic Steering, Red Calipers, ACC, Top View, Connect, Tints, Rear Side Airbags, Rear heated seats; MP4S
Re: RS6 C7 Propshaft Hanger Bearing failed
Car in malaysia only done 18k miles less than 3 years old .I check the part number for the propshaft currently end with alphabet J the revised version after April 2014 is M so I presumed the M is the updated one, I'm getting custom made hanger bearing here in malaysia a lot cheaper than buying complete new propshaft .
Re: RS6 C7 Propshaft Hanger Bearing failed
Bro wasap me 0179175735. I need help with bearing propshaft for my c6 rs6. Mine is nearly toastFFRS6C7 wrote: ↑Sat Jun 04, 2016 3:43 pmCar in malaysia only done 18k miles less than 3 years old .I check the part number for the propshaft currently end with alphabet J the revised version after April 2014 is M so I presumed the M is the updated one, I'm getting custom made hanger bearing here in malaysia a lot cheaper than buying complete new propshaft .
RS6 C6 SEDAN RHD VS_PERFORMANCE STAGE 1.5, 2ND CAT DELETE, MILTEK CATBACK, BMC DROP IN FILTERS.
Re: RS6 C7 Propshaft Hanger Bearing failed
You probably shouldn't put your phone number on a public forum. And you know he has a different car to you and is in Malaysia, and it was 2 years ago?
Re: RS6 C7 Propshaft Hanger Bearing failed
I had this happen to my c5 Rs6 in 2007, every time I used to go from D To R on the gear box used to get a slight clonk noise.
Who is online
Users browsing this forum: No registered users and 197 guests