RS6 C7 | 800+ BHP

[DXB_RS6]

Still curious, afaik you need a custom tune that takes in account the methanol boost (basicly race fuel values i suppose). Just wondering, how the care behaves when it isn't beeing pushed and no methanol is injected (since our cars can't detect octaan levels).
My tuner hasn't answered me, in a way i would love to just water inject under boost/when IAT temps getting higher...and maybe seperate system or switch/tank with water/meth mix when wanted.

I didn't change my tune after the aquamist instal. When the boost is low the meth is off and the car drives normally.

Sent from my SM-G955F using Tapatalk

I see, cheers .
Then i suppose the gains are 'minimal' and its first priority is cool things down, but nice non the less and that would be my goal aswell (some extra performance is always nice).

Exactly right.

I'm in Dubai where summers hit 45 degrees, honestly, I don't know ow how beneficial it would be in Europe.

Sent from my SM-G955F using Tapatalk

[finance-nick]

The ambient temp makes little difference, if your engine runs high IAT’s it will be the same where ever your located, just be a little worse in hot countries. The lower IAT will allow you to run bigger turbos and reach 900+ bhp

[DXB_RS6]

The ambient temp makes little difference, if your engine runs high IAT’s it will be the same where ever your located, just be a little worse in hot countries. The lower IAT will allow you to run bigger turbos and reach 900+ bhp

When are your turbo's coming?

Sent from my SM-G955F using Tapatalk

[finance-nick]

The ambient temp makes little difference, if your engine runs high IAT’s it will be the same where ever your located, just be a little worse in hot countries. The lower IAT will allow you to run bigger turbos and reach 900+ bhp

When are your turbo's coming?

Sent from my SM-G955F using Tapatalk

All will be revealed soon enough

[DXB_RS6]

Dyno day today.

Max hp. 770hp
Max Torque 841

Video: https://youtu.be/tUiNfZEbknI[IMG]https: ... ef6cef.jpg[/IMG]

Sent from my SM-G955F using Tapatalk

[finance-nick]

Dyno day today.

Max hp. 770hp
Max Torque 841

Wow, thats alot, what is your total mod list, and do you know how much extra it now has with the meth?

[dasquade]

Massive torque . Nice one!

[MikeFish]

Dyno day today.

Max hp. 770hp
Max Torque 841

Video: https://youtu.be/tUiNfZEbknI[IMG]https: ... ef6cef.jpg[/IMG]

Sent from my SM-G955F using Tapatalk

[Tadass910]

I bet it’s 2104 year model car not even facelift nice numbers)

[H8yup]

Hi. Does anyone know what water/meth kits was used

[MikeFish]

Finance Nick posted about his install a few days ago. Think it was Devils Own

[Paulm]

I see heat is a real issue on these cars. Anyone thought if redirecting the turbo intake pipes and put the filters under the front slam panel??

See pic attcehd, obvioulsy will only work if you bin the stock charge cooler.

Inlet pipe work could go under the intercooler pipework and out into the space under the slam panel. plenty room and keeps most of the inlet pipework away form the exhaust manifolds and allows huge amounts of cold air into the engine

excuse my very poor example, but gives you the general idea

[FSodre]

Dyno day today.

Max hp. 770hp
Max Torque 841

Wow, thats alot, what is your total mod list, and do you know how much extra it now has with the meth?

I dont know if you remember that. but if yes, i wold like know to