RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Hello

complete MOV'IT front kit:

- 4M6 calipers (996 Turbo/GT3) 4 pistons (36/44)

- mov'it high-strength steel alloy brackets

- Porsche pads (wear 50%)

- 2-piece rotors 380/32: Movi'it aluminium hat, double inner cooling fins rotors.
(current pads and one other set of pads before changing rotor's rings)

- bolts

NB1:
rotor hats must be change to match with A6/S6 (2000), brackets OK
NB2:
- new rotor ring: 500€ piece
- pads (Porsche): 250€ complete front
- changing hat (A6/S6): 400€ both

Price: 1200€ + shipping from France (about 20 - 40€)

Some pictures:

Hi, I'm interested, are those working good? How much wear have the rotors?

Avus RS4

hello

the calipers work very good, the dustshields are new

the calipers pistons (big pistons) are 2x36mm and 2x44mm, the total pistons area (=braking power) is 51 cm2, 10% less than 8 pistons calipers (56 cm2)...

the pad area is 75,5 cm2 each

you can finish current pads (used 50%) and one other set of pads before changing rotor rings

rotor rings are Porsche 993 GT2 380x32, they are available by Movit and Porsche. Brembo sell similar.

i can sell a set of new movit rotor rings for 600 euros both (the normal price is 450/500 euros each)

kind regards

laurent

PS: the Movit 4M6 front kit is TüV certificated

Thanks Durit, very helpful.
Last question: I have the original setup in my Rs4 B5, so standard rims. Are the rims big enough to accept these Movit calipers and rotors?

gipsy73 wrote:Thanks Durit, very helpful.
Last question: I have the original setup in my Rs4 B5, so standard rims. Are the rims big enough to accept these Movit calipers and rotors?

Yes, the "stock" rims are big enough, without need spacers

PS: email: dr.dumas-vidal"a"wanadoo.fr

Hi

It's sold

thanks

laurent