Page 1 of 2

S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM STAGE 3 £2000

Posted: Thu Feb 22, 2007 12:57 am
by flashyg
I will shortly have the full RS4 458 BHP - MTM kit for sale, as of next month I believe.

This code and System actually delivers 470.6 BHP and 609.8 NM. Dyno Plot available for reference.

Qst's Web site lists the work I have had done as the 458 Bhp up grade.
It is important to mention that with the better exhaust system and 100 CPI Race Cats my power is significantly better.

Web Site for Reference

http://www.qstuning.com/products.jsp?pa ... variant=42

Items for Sale are as Follows.

471 BHP Modified MTM Motronic ECU without speed limiter, and improved torque over entire rev range with additional rear and middle exhaust system in stainless steel with stainless steel down pipes and 100 CPI metal race cats.
(610 Nm). 0-60 4.0 seconds Max 194mph.


Total Cost £3572.00 (made up by £3040 + vat @ £532)

I am prepared to sell this system for £1300 for Full exhaust and down pipes with 100 CPI Steel Race Cats, £600 for the ecu map and £100 for the ecu.

(Ecu will have immobiliser de activated, if requested and you can have this coded by a tuner, costs are Typically £80. Ecu immobiliser can be left activated for or Audi tech to match to your key if you prefer.)

**Sale Price For MTM Modifications £2000.00 **


Further Items For sale.

If you have an S4 and you wish to up grade it to run the above RS4 Stage 3 Power, I am also selling the following items of interest.

Rs4 injectors x 6, £200
Rs4 Exhaust Manifolds Pair, £200
Rs4 intake pipes to KO4's (left and right sides), £200
Rs4 intake rubber boots (Mating dv's and Y pipe to intake pipes), £40

Rs4 255lph Walbrow high-pressure pump, it has been on the car for 3k miles and is wired to fit in to another car so no messing around to re fit,
Cost £90, Sell for £60.

Rs4 KO4 turbos x 2. These are in perfect condition and have done 25k miles. £800
Note on Turbos. To make these as new all that is needed is a service kit I think £100.

** Sale Price For RS4 Modification Parts £1500.00 **



So there we are, the word is out if you wish to make me an acceptable offer on the whole up grade from S4 265 BHP to Rs4 471 please let me know.


***Total Price For Everything,S4 to RS4 Modification selling all Parts £3000.00 ***



G

RE: S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM STAGE 3 £2

Posted: Thu Feb 22, 2007 1:38 am
by Blue_Thunder
PM sent re: RS4 mods

RE: S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM STAGE 3 £2

Posted: Thu Feb 22, 2007 8:21 am
by davs4
PM sent also regarding RS4 bits
Thanks

RE: S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM STAGE 3 £2

Posted: Thu Feb 22, 2007 12:26 pm
by flashyg
Nothing sold as yet:

My number 1 priority is to sell the full kit or in 2 parts

Rs4 MTM Stage 3
S4 to Rs4 Ko4 conversion Kit

***All items out on the 12/3/2007***

Deposit will be requested.



I have a perfect Rs4 clutch and fly (Like New)
Done 15k miles it will be perfect as I never launch heavy and match the engine to rotating mass speeds on down change.
I have considered keeping this clutch with 580 bhp but its a risk.
This is available for a fair price also. Essential for a KO4 up grade Clutch only if requested No issue if not sold on any of these parts as I have a spare gear box which these will fit too!

_------------------------------------_

Thanks for the PM,s

Blue_Thunder
When you know what you would like I will happily discuss.

davs4
I will sell the rubber connectors to you if they do not go as a full up grade.
Sorry for not splitting at this early stage.

RE: S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM STAGE 3 £2

Posted: Thu Feb 22, 2007 1:13 pm
by tdiquattro
PM sent - ECU & Chip
Thanks,

Re: RE: S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM STAGE

Posted: Thu Feb 22, 2007 1:57 pm
by davs4
flashyg wrote:
Thanks for the PM,s


davs4
I will sell the rubber connectors to you if they do not go as a full up grade.
Sorry for not splitting at this early stage.
Cheers G just let me know

RE: Re: RE: S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM ST

Posted: Thu Feb 22, 2007 2:28 pm
by flashyg
Nothing sold as yet:

My number 1 priority is to sell the full kit or in 2 parts

Rs4 MTM Stage 3
S4 to Rs4 Ko4 conversion Kit

***All items out on the 12/3/2007***

Deposit will be requested.

RE: Re: RE: S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM ST

Posted: Thu Feb 22, 2007 4:04 pm
by S2tuner
Just a little word of warning, the RS4 ECU won't work without wiring loom changes on an S4. That's just so everyone is aware of this...

RE: Re: RE: S4-RS4 MTM 471BHP FULL KO4 KIT £3000, RS4 MTM ST

Posted: Thu Feb 22, 2007 10:55 pm
by flashyg
Thanks Mihnea Nice to see your keeping an eye on this...

So to recap:
If you have a stock RS4 get this MTM stage 3 for:

**Sale Price For MTM Modifications £2000.00 ** Negotiable, Reasonable offers only.

Or

***Total Price For Everything,S4 to RS4 Modification selling all Parts £2500.00 ***
#######(No ecu or map included for the S4 package go to Mihnea at Mrc )############

Nothing Sold yet plenty offers for single parts and I will split If no one wants the full kit or kits.

Thanks

G

S4 - RS4

Posted: Fri Feb 23, 2007 9:23 am
by chalkz
Why are you selling the conversion, is it still on an S4 that you may be interested to sell, I am looking for a big spec S4!

RE: S4 - RS4

Posted: Fri Feb 23, 2007 10:27 am
by Nige_RS4
Why are you selling the conversion, is it still on an S4 that you may be interested to sell, I am looking for a big spec S4!
I believe Gordon is planing a big power upgrade to his RS4 ;-)

RE: S4 - RS4

Posted: Fri Feb 23, 2007 10:39 pm
by flashyg
Thanks Nige,
Had to say this out loud , you know, in denial.
Hope it goes well if you know what I mean!
G

Posted: Fri Mar 16, 2007 2:25 pm
by blackb1ade
So I made it at last...

As I mentioned in the other thread - I am about to get (hopefully this weekend at some point even) an unmodded RS4 B5

First thing I was going to do is run it down to Kim Collins in Hayward Heath for the 458 tune up - hence I'm interested in the first part of what you're looking to sell.

Obviously QST will cost me 3572-ish quid, but that's 'all in'/fitted - roll in/blast out.

My main question is - what you're selling is the parts [and software] right? (full zorst+cats/ecu/remap?)

If so - any idea how much that would be to get fitted/tested etc and by whom? (and how 'easy' that is to do - I'm not exactly very mechanically adept...)


Cheers
Ash

Posted: Sun Mar 18, 2007 9:30 pm
by flashyg
I imagine tops at a good garage
Ecu free to fit 10 min
Down pipes , well, not easy. so allow 1 hour per side plus 1 hour for exhaust fitting.
Yes I am selling this set up.
Good you are now hear and posting.
Let me know if you want the ecu and code
Or the lot, exhaust down pipes also.
G

Posted: Tue Mar 20, 2007 10:09 am
by blackb1ade
Cheers FlashyG - I'm currently investigating the best way for me to go, I 'll get back to you to let u know