Wanted ABT 18"x8.5 alloy

Old Adverts Up To The End Of 2010
Post Reply
Rusty
Neutral
Posts: 11
Joined: Wed Dec 17, 2003 3:50 pm

Wanted ABT 18"x8.5 alloy

Post by Rusty » Wed Dec 17, 2003 5:33 pm

Hi there folks, does anyone out there have or know of anyone who has an spare ABT 18"x8.5 alloy wheel, to fit my S3, who would be willing to part company with it.

Carps
4th Gear
Posts: 557
Joined: Thu May 01, 2003 11:21 pm
Location: Surrey, England
Contact:

Re: Wanted ABT 18"x8.5 alloy

Post by Carps » Wed Dec 17, 2003 8:04 pm

There was a pair of these on eBay last week.

Still there actually - 20 hours to go.
ImageAre these them ?

£21 at the moment...
Used to have these wheels on my MkIV Golf

Rusty
Neutral
Posts: 11
Joined: Wed Dec 17, 2003 3:50 pm

Re: Wanted ABT 18"x8.5 alloy

Post by Rusty » Wed Dec 17, 2003 9:00 pm

I've checked these out and it is a 18" x 8J wheel. Ive got 18 x 8.5J wheels fitted to my S3. A effin great big pothole destroyed one of them.

Thanks for the link.

Carps
4th Gear
Posts: 557
Joined: Thu May 01, 2003 11:21 pm
Location: Surrey, England
Contact:

Re: Wanted ABT 18"x8.5 alloy

Post by Carps » Wed Dec 17, 2003 9:13 pm

You could always buy them use the 8.0s on the front and the 8.5s on the rear. I know these wheels cost about £250-£300 each so if they go cheap enough they have to be worth considering.
Alternatively, how bad is the damage ? One of my wheels was bent on a pot-hole, and Diamond Styling had it straightened for me and then restored it. FWIW, Diamond Styling are, IMO, the best wheel restorers around - if it can be fixed, they can do it - 020 8969 9690

Rusty
Neutral
Posts: 11
Joined: Wed Dec 17, 2003 3:50 pm

Re: Wanted ABT 18"x8.5 alloy

Post by Rusty » Thu Dec 18, 2003 1:37 am

Never even thought of doing that. The only thing is that there is a slight difference between the 8J & the 8.5J wheels (8.5J wheels have a false bolt head at the end of each spoke). I suppose that its only a slight difference.

I took my damaged alloy to my local alloy wheel specialist/repairer who checked it out & found the wheel was cracked & was so bad it could not be repaired.

martinjs
Neutral
Posts: 23
Joined: Sun May 11, 2003 3:25 am
Location: surrey

Re: Wanted ABT 18"x8.5 alloy

Post by martinjs » Sat Dec 20, 2003 4:51 pm

They're from an S4 which has a different bolt pattern 5x112

Carps
4th Gear
Posts: 557
Joined: Thu May 01, 2003 11:21 pm
Location: Surrey, England
Contact:

Re: Wanted ABT 18"x8.5 alloy

Post by Carps » Sat Dec 20, 2003 6:19 pm

Abt wheels are usually double drilled - mine were 100mm and 112mm. The VW range tend to use 100mm, and I believe this goes for the A3 too. Anyhow, they are gone now - £90. Not bad, but they did look like they needed a refurb.

Post Reply

Return to “Ads Up To End Of 2010”

Who is online

Users browsing this forum: No registered users and 55 guests