Post
by Silversea » Thu Jan 07, 2010 9:31 am
When you remove your original seats, you'll have to disconnect the airbag loom and the loom for the heated seats.
The Pole Position's don't have airbags so no loom to connect up...... If you turn on the ignition the aigbag light will illuminate, to prevent this you need to fit airbag resistors, these are small looms with O/E connectors that will plug into the original loom from the car, these will prevent your airbag light from coming on.
Regarding the "up-rights", these are the side supports that bolt onto the sides of the seats and bolt onto the subframes.
I'm sure the TT ones are different to those needed for the B5.......
Just can't get the smile off my face......