All
I purchased my RS4 off a member of this forum recently and it came with an AMD chip upgrade in the ECU (dynod at 418bhp on my car).
I recently replaced the ECU due to the main processor failing to comunicate with the clock set so have been running with a standard ECU for about 2 months.
The car has just undergone the following:
new engine mounts,
new transmission mounts,
new rear diff mount,
adjusted front snub mount,
TSB stabiliser bar,
replacement of ALL suspension bushes
AND
Full turbos back Miltek exhaust system with cats.
Due to the new Miltek I will be having the car remapped by MRC to take advantage of its freeflow nature.
The AMD chip is therefore surplus to requirements.
Will take £200 but you will have to have the chip professionally soldered into your own ECU (I have several contacts that could do this).
Thanks
NICKH
AMD 420 BHP CHIP FOR SALE
Wow
All
Just collested the car from Racetech UK and what a difference.
New engine mounts, TSB bar and GEO setup and WOW!!!!!!!!.
This thing is now on a par with my RB30 R34 Skyline GTR (650 bhp but with LAGGGGGG !!!).
Still on standard ECU but with full Miltek inc 200 cell cats and car feels much more lively than std exhaust + AMD remap .
Having full GIAC remap (for full turbo back exhast) on friday and expecting good results (had my 996 GT2 done by them with incredilble results).
Will report back after the weekend.
AMD 420bhp chip now available to the highest bidder.
Cheers
NICKH
Just collested the car from Racetech UK and what a difference.
New engine mounts, TSB bar and GEO setup and WOW!!!!!!!!.
This thing is now on a par with my RB30 R34 Skyline GTR (650 bhp but with LAGGGGGG !!!).
Still on standard ECU but with full Miltek inc 200 cell cats and car feels much more lively than std exhaust + AMD remap .
Having full GIAC remap (for full turbo back exhast) on friday and expecting good results (had my 996 GT2 done by them with incredilble results).
Will report back after the weekend.
AMD 420bhp chip now available to the highest bidder.
Cheers
NICKH
RE: Wow
Not to put a downer on your sale of the AmD chip Nick - Before the days of BigBoysToys the chip tuners like Geoff, Adam and Gary at AmD generally did a car specific 're-map' - it's on a riser board because they encrypted their code to stop others just copying it with a eprom reader.
2012 Audi RS3 in Daytona Grey
2003 VW Golf IV R32 Turbo Deep Blue Pearl - "THE PROJECT"
1993 VW Golf Mk1 GTi Rivage Blue
1968 Karmann Ghia
2003 VW Golf IV R32 Turbo Deep Blue Pearl - "THE PROJECT"
1993 VW Golf Mk1 GTi Rivage Blue
1968 Karmann Ghia
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
RE: Wow
Aha, I recall that username on gtr.co.uk!
You've put your GTR up for sale, right
You've put your GTR up for sale, right
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
B5 RS4
R33V-SPEC
Yes I have recently sold my RB30 R34 GTR but I may have an 800+bhp R33 on the way.
I actually bought the RS4 because my R34 went into the body shop for about 6 weeks and I hate courtesy cars so the RS4 was a short term stop gap!.
Having already owned S2, RS2, RS6 + several other Audis including Coupes, WR, 80 cab etc I thought I would try an RS4.
I am so happy with it I am probably going to keep it now that I have effectively refurbed it back to good as new with the suspension rebuild and new engine mounts.
For a practical load lugger I can't think of anything better for the price. It is far more involving to drive than my RS6 was and still has that bullet proof feel to it.
It will be staying in my stable for a while I think: currently - B5 RS4, E30 M3, 4WD Corrado VR6 Turbo, Mid engined MK1 Golf VR6 Turbo, Westfield XTR4 (370 bhp), Audi Q7, Ultima GTR, 1971 Cooper S and a Gumpert Apollo Sport + a few others.
Keep in touch.
Cheers
NICKH
Yes I have recently sold my RB30 R34 GTR but I may have an 800+bhp R33 on the way.
I actually bought the RS4 because my R34 went into the body shop for about 6 weeks and I hate courtesy cars so the RS4 was a short term stop gap!.
Having already owned S2, RS2, RS6 + several other Audis including Coupes, WR, 80 cab etc I thought I would try an RS4.
I am so happy with it I am probably going to keep it now that I have effectively refurbed it back to good as new with the suspension rebuild and new engine mounts.
For a practical load lugger I can't think of anything better for the price. It is far more involving to drive than my RS6 was and still has that bullet proof feel to it.
It will be staying in my stable for a while I think: currently - B5 RS4, E30 M3, 4WD Corrado VR6 Turbo, Mid engined MK1 Golf VR6 Turbo, Westfield XTR4 (370 bhp), Audi Q7, Ultima GTR, 1971 Cooper S and a Gumpert Apollo Sport + a few others.
Keep in touch.
Cheers
NICKH
RE: B5 RS4
Wish i had your garage
What's quickest on the track , the ultima with all the BHP per ton or is it the Apollo or westfeild with the downforce?
I presume its diffrent depending on which circut.
please tell (-:
What's quickest on the track , the ultima with all the BHP per ton or is it the Apollo or westfeild with the downforce?
I presume its diffrent depending on which circut.
please tell (-:
1999 Kingfisher blue S4 lightly fettled.
Re: RE: Wow
Unfortunately so wrong. and the reason for the encrypted board was a totally different one too.R5YUG wrote:Not to put a downer on your sale of the AmD chip Nick - Before the days of BigBoysToys the chip tuners like Geoff, Adam and Gary at AmD generally did a car specific 're-map' - it's on a riser board because they encrypted their code to stop others just copying it with a eprom reader.
- NumberoftheBeast
- 4th Gear
- Posts: 579
- Joined: Sun May 20, 2007 10:41 am
- Location: Manchester
Who is online
Users browsing this forum: No registered users and 36 guests