Genuine RS Alloys ( Winter ) - skiing anybody?

Old Adverts Up To The End Of 2010
Post Reply
User avatar
tdiquattro
3rd Gear
Posts: 465
Joined: Sun Aug 03, 2003 4:55 pm
Location: Bucks

Genuine RS Alloys ( Winter ) - skiing anybody?

Post by tdiquattro » Sun Aug 03, 2003 10:46 pm

I have 4 boxed genuine Audi alloys, I think they are probably for winter use on an RS4. They are 17 x 7.5 (5x115) but PCT 25 offset.

£350 the lot, second set for RS4, winter use?

anybody?...
Nige'

2000 silver S4 Saloon

User avatar
SimonS4MTM
Top Gear
Posts: 2314
Joined: Thu May 29, 2003 2:40 pm
Location: Norfolk
Contact:

Re: Genuine RS Alloys ( Winter ) - skiing anybody?

Post by SimonS4MTM » Mon Aug 04, 2003 8:18 am

Would these fit the B5 S4, are they the same offset?
| RS4 - B7 | Phantom Black | Seit 2017 |
| S4 - B5 | Ebony Black | Seit 2002 |

User avatar
wazza
Top Gear
Posts: 2464
Joined: Wed Jan 08, 2003 1:07 am
Location: Near the Magic Roundabout
Contact:

Re: Genuine RS Alloys ( Winter ) - skiing anybody?

Post by wazza » Mon Aug 04, 2003 10:11 am

I think S4s were ET35, but also the bolt pattern is 5x112.
I'm sure one of the relevant gurus will tell all soon. [img]images/graemlins/thumb.gif[/img]
Paul

User avatar
tdiquattro
3rd Gear
Posts: 465
Joined: Sun Aug 03, 2003 4:55 pm
Location: Bucks

Re: Genuine RS Alloys ( Winter ) - skiing anybody?

Post by tdiquattro » Mon Aug 04, 2003 12:37 pm

oops, meant 5x112, don't think they will fit an S4 as they stick out too far, they come to the edge of the wheel arch on my A4. Do the S4 have wider arches?
Nige'

2000 silver S4 Saloon

Carps
4th Gear
Posts: 557
Joined: Thu May 01, 2003 11:21 pm
Location: Surrey, England
Contact:

Re: Genuine RS Alloys ( Winter ) - skiing anybody?

Post by Carps » Mon Aug 04, 2003 6:03 pm

I think S4s were ET35, but also the bolt pattern is 5x112.
I'm sure one of the relevant gurus will tell all soon.


Not a guru, but resident...

The standard S4 wheel is ET45. ET25 will almost certainly put the wheel outside the arches. I have a set of ET45 B6 wheels and with a 5mm spacer these are on the edge of the bodyline. Anymore and they would be outside. Therefore, I am taking an educated guess, ET40 will probably be the limit for a standard S4 B5

Post Reply

Return to “Ads Up To End Of 2010”

Who is online

Users browsing this forum: No registered users and 11 guests