FS: Used B5 RS4 camshafts relatively good nick

Parts For Sale / Wanted Only
Post Reply
User avatar
mad-for-tar
2nd Gear
Posts: 155
Joined: Mon Jan 23, 2006 7:24 pm
Location: Essex

FS: Used B5 RS4 camshafts relatively good nick

Post by mad-for-tar » Sat Jun 18, 2011 4:54 pm

For sale used camshafts taken from my B5 RS4, covered 69k miles before removal, replaced with 4 new shafts. Inlet ones in good order, UK drivers side exhaust cam probably has most wear out of the 4 but is very little.

Open to offers for the 4, no use to me, only gathering space in the garage. May suit someone looking for spares or needs something to get them by for a while until bigger plans develop.

Located in Chelmsford, can post if required for small price but collection/meet would be preferred.

Thanks.

EXHAUST for Cyls 1-3
Image

Worst Lobes:
Image

INLET Cam Cyls 1-3:
Image

Typical condition of the lobes on this shaft:
Image

INLET cam Cyls 4-6:
Image

Lobes at Cyl 6 (bulkhead which are normally the worst ones):
Image

EXHAUST Cam Cyls 4-6 (Bank 2):
Image

Typical condition of the lobes of this shaft:
Image

Thanks for looking :)
There are 2 tools you need in life: WD-40 and Duct Tape.
If it moves and it should'nt, use the Duct Tape
If it doesn't move and it should, use the WD-40

:)

User avatar
mad-for-tar
2nd Gear
Posts: 155
Joined: Mon Jan 23, 2006 7:24 pm
Location: Essex

Re: FS: Used B5 RS4 camshafts relatively good nick

Post by mad-for-tar » Fri Jun 24, 2011 10:56 pm

still up for grabs, open to offers or eventually will end up on scrap heap....
There are 2 tools you need in life: WD-40 and Duct Tape.
If it moves and it should'nt, use the Duct Tape
If it doesn't move and it should, use the WD-40

:)

User avatar
leet
2nd Gear
Posts: 224
Joined: Tue May 26, 2009 8:32 pm
Location: Hants/berks border

Re: FS: Used B5 RS4 camshafts relatively good nick

Post by leet » Tue Jul 05, 2011 7:46 pm

£10

saint747
Neutral
Posts: 4
Joined: Fri Jul 15, 2011 4:24 am

Re: FS: Used B5 RS4 camshafts relatively good nick

Post by saint747 » Sun Jul 17, 2011 11:05 pm

hi have you still got the cams?

User avatar
mad-for-tar
2nd Gear
Posts: 155
Joined: Mon Jan 23, 2006 7:24 pm
Location: Essex

Re: FS: Used B5 RS4 camshafts relatively good nick

Post by mad-for-tar » Thu Sep 01, 2011 9:50 pm

Hi...still have them alright....open to offers or they are going on scrap heap. Drop me a PM if anyone still interested, I dont be in here often but at least will get email notification of a PM. Thanks.
There are 2 tools you need in life: WD-40 and Duct Tape.
If it moves and it should'nt, use the Duct Tape
If it doesn't move and it should, use the WD-40

:)

User avatar
mad-for-tar
2nd Gear
Posts: 155
Joined: Mon Jan 23, 2006 7:24 pm
Location: Essex

Re: FS: Used B5 RS4 camshafts relatively good nick

Post by mad-for-tar » Thu Sep 01, 2011 10:33 pm

provisionally sold.....
There are 2 tools you need in life: WD-40 and Duct Tape.
If it moves and it should'nt, use the Duct Tape
If it doesn't move and it should, use the WD-40

:)

User avatar
mad-for-tar
2nd Gear
Posts: 155
Joined: Mon Jan 23, 2006 7:24 pm
Location: Essex

Re: FS: Used B5 RS4 camshafts relatively good nick

Post by mad-for-tar » Mon Oct 10, 2011 3:16 pm

Still available these....
There are 2 tools you need in life: WD-40 and Duct Tape.
If it moves and it should'nt, use the Duct Tape
If it doesn't move and it should, use the WD-40

:)

Post Reply

Return to “Parts”

Who is online

Users browsing this forum: jordee and 40 guests