C6 RS6 F&R Brakes (Discs and Pads)

Parts For Sale / Wanted Only
Post Reply
NICKH
2nd Gear
Posts: 174
Joined: Tue Feb 21, 2006 8:35 am
Location: WEST YORKSHIRE

C6 RS6 F&R Brakes (Discs and Pads)

Post by NICKH » Tue Nov 05, 2024 3:54 pm

I upgraded my car to RB Racing Rotors BBK all round so have my old (actually only covered around 10k miles) set up going spare.

Disc thickness (face surface to surface):

NSF 34.9mm (pads are 13.5mm inc backing plate - so not loads left on them)
OSF 35.0mm (pads are 13.1mm)

NSR 26.2mm (pads are 16mm inc backing plates - so near new)
OSR 26.1mm (pads are 16mm)

Not sure what they are worth (£400 for the lot?) BUT they are now VERY EXPENSIVE FROM AUDI!

Located near Burnley (BB12 postcode) and collection preferred as they are VERY HEAVY.

NICKH
2nd Gear
Posts: 174
Joined: Tue Feb 21, 2006 8:35 am
Location: WEST YORKSHIRE

Re: C6 RS6 F&R Brakes (Discs and Pads)

Post by NICKH » Thu Nov 07, 2024 3:12 pm

£200 for the lot as they are just sat in my barn?

NICKH
2nd Gear
Posts: 174
Joined: Tue Feb 21, 2006 8:35 am
Location: WEST YORKSHIRE

Re: C6 RS6 F&R Brakes (Discs and Pads)

Post by NICKH » Tue Nov 12, 2024 10:45 am

Anyone want to collect these FOC as I will be taking them to the tip this weekend as I'm sick of looking at them?

From measurements:

front discs look around 50% worn
front pads are 90% worn
rear discs are 90% worn
rear pads are 20% worn

Will swap the lot for a Fridge Box of beers (Stella or similar) :biggrin3:

Limited100
Neutral
Posts: 10
Joined: Sat Nov 16, 2024 6:55 pm

Re: C6 RS6 F&R Brakes (Discs and Pads)

Post by Limited100 » Sat Nov 16, 2024 7:01 pm

Hi Nick, just DM'd you, cheers, Simon.

NICKH
2nd Gear
Posts: 174
Joined: Tue Feb 21, 2006 8:35 am
Location: WEST YORKSHIRE

Re: C6 RS6 F&R Brakes (Discs and Pads)

Post by NICKH » Sat Nov 16, 2024 8:38 pm

Hopefully being collected tomorrow morning. Glad that someone else can make use of them.

NICKH
2nd Gear
Posts: 174
Joined: Tue Feb 21, 2006 8:35 am
Location: WEST YORKSHIRE

Re: C6 RS6 F&R Brakes (Discs and Pads)

Post by NICKH » Sun Nov 17, 2024 1:08 pm

Gone!

Post Reply

Return to “Parts”

Who is online

Users browsing this forum: No registered users and 47 guests