Page 1 of 1
B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Thu Jun 16, 2022 11:03 am
by AndyMacRS4
Hi all,
Age old question I would imagine, but does anyone happen to have a front right lower door blade for an RS4 (B7) part number 8E0853960 / 8E08539607DL ?
Tried all the dealers and now discontinued, tried eBay but mostly junk, any help appreciated.
TIA Andy
Re: B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Fri Sep 02, 2022 2:15 am
by d1avid2
Nice
Sent from my iPhone using Tapatalk
Re: B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Fri Nov 29, 2024 4:56 pm
by donsounds
The post is two years old, but I am also looking for this... doesn't seem to be anything available anywhere. Maybe someone has 3D printed it? I also know the part is the same as the B6 S4...Part number is 8E0853960 7DL,Thanks!!
Re: B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Mon Dec 02, 2024 8:44 pm
by donsounds
Karl311 wrote: ↑Mon Dec 02, 2024 6:23 am
Hello are you still out for it let me know I got something available would you mind checking it msg me on my email address cause I only come to site once so tell me where you are located in the email
Karlrutherford311@gmail.com
Thanks
email sent. Thanks!
Re: B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Tue Dec 03, 2024 3:48 pm
by donsounds
Still looking...Wrong blades were offered.
Re: B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Sun Apr 20, 2025 12:38 am
by ally_m
Do people normally swap out all the door blades for alternative ones that will fit if they can't get the specific RS4 ones? Absolute b*llache trying to find replacements.
Re: B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Thu May 22, 2025 10:39 am
by DavidRS4
I’ve paid for one to be developed. Reverse scanning of the passenger side to make a CAD drawing to then have a mould made. Back mounting part will be laser cut.
Mid June I should be providing my car to test fit the part.
I’ll then own the mould and can order them to sell.
Re: B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Thu May 22, 2025 4:46 pm
by JRC1
DavidRS4 wrote: ↑Thu May 22, 2025 10:39 am
I’ve paid for one to be developed. Reverse scanning of the passenger side to make a CAD drawing to then have a mould made. Back mounting part will be laser cut.
Mid June I should be providing my car to test fit the part.
I’ll then own the mould and can order them to sell.
I've been saying someone should do this for years! Do let us know if it goes well and if you're able to 3D print them etc
Re: B7 RS4 Lower Door Blade, Front Right (8E0853960)
Posted: Thu May 22, 2025 6:43 pm
by DavidRS4
JRC1 wrote: ↑Thu May 22, 2025 4:46 pm
DavidRS4 wrote: ↑Thu May 22, 2025 10:39 am
I’ve paid for one to be developed. Reverse scanning of the passenger side to make a CAD drawing to then have a mould made. Back mounting part will be laser cut.
Mid June I should be providing my car to test fit the part.
I’ll then own the mould and can order them to sell.
I've been saying someone should do this for years! Do let us know if it goes well and if you're able to 3D print them etc
Too large to 3d print. They’ll be from a mould.