Wanted rs4 b7 coilovers

Parts For Sale / Wanted Only
Post Reply
Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Wanted rs4 b7 coilovers

Post by Quango86 » Sat Apr 27, 2019 8:48 pm

DRC pipe gave up today so on the lookout for a set of coilovers.
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Seattle-squash
2nd Gear
Posts: 182
Joined: Sun Jun 21, 2015 5:33 pm

Re: Wanted rs4 b7 coilovers

Post by Seattle-squash » Sun Apr 28, 2019 7:50 am

Quango86 wrote:DRC pipe gave up today so on the lookout for a set of coilovers.
I went the pss9 and have some light squeaks over bumps, and if I did it again I might have done kw-v3 or the öhlins. But still very happy with how the ride/feel and ride on settting 5 (1-9, 1 hardest). Just some of my feedback. Good luck!

I'll never grow up
Neutral
Posts: 2
Joined: Wed Apr 24, 2019 12:09 pm

Re: Wanted rs4 b7 coilovers

Post by I'll never grow up » Thu May 02, 2019 12:14 pm

I'm at the same point - can't decide what to get.

I toyed with the idea of the non adjustable AP's then moved back to the Bilsteins but what's peoples opinion on the B14 vs BC racing ones

Sorry to hijack your post :D

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Wanted rs4 b7 coilovers

Post by Quango86 » Thu May 02, 2019 12:54 pm

I'll never grow up wrote:
Thu May 02, 2019 12:14 pm
I'm at the same point - can't decide what to get.

I toyed with the idea of the non adjustable AP's then moved back to the Bilsteins but what's peoples opinion on the B14 vs BC racing ones

Sorry to hijack your post :D
I went for koni dampers after speaking to Steve from crs looking forward to trying them as I would like to retain a bit of comfort
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

User avatar
jamiej
2nd Gear
Posts: 204
Joined: Tue Apr 03, 2018 4:06 pm

Re: Wanted rs4 b7 coilovers

Post by jamiej » Thu May 02, 2019 3:05 pm

Steve's (Shockerboy?) set up gets good reviews. Be keen to see how you get on with them as I am likely to go this route when my DRC goes south.

Sent from my ONEPLUS A6013 using Tapatalk

Current
'07 - Audi RS4 Avant Daytona Grey
'16 - BMW M135i F20 (LCI)
Gone
'02 Audi 8L A3 1.9 TDI (PD)
'03 Subaru Impreza WRX STI
'96 VW Golf VR6
'91 Toyota MR2 NA
'90 Peugeot 205 GTI 1.9
'90 VW Mk2 Golf GTI 8V

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Wanted rs4 b7 coilovers

Post by Quango86 » Thu May 02, 2019 3:45 pm

jamiej wrote:
Thu May 02, 2019 3:05 pm
Steve's (Shockerboy?) set up gets good reviews. Be keen to see how you get on with them as I am likely to go this route when my DRC goes south.

Sent from my ONEPLUS A6013 using Tapatalk
Will keep you posted. Had a few cars over the years with coilovers but am getting older now and just wanted a bit of comfort. Yeah that's the man takes the time on the phone to explain them so I'm hoping for good things
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

rs user
4th Gear
Posts: 694
Joined: Tue Jan 07, 2014 5:01 pm

Re: Wanted rs4 b7 coilovers

Post by rs user » Sat May 04, 2019 10:13 am

the finish on the bilstein coilovers lasts only a few months-with serious surface corrosion in less than 12,thats using the car when no salt on roads and greasing up the coilover threads
they work well enough but would never buy another set -waste of £800 odd quid at the time

Post Reply

Return to “Parts”

Who is online

Users browsing this forum: Felix2566 and 124 guests