Bought a luk rep set clutch from euro and a luk flywheel from Rock auto to fit to my car when I removed the gear box to fit it I found that my car had a sachs racing 4 paddle clutch and lightened flywheel so I'm having this redone at cg motor sports. I'm therfore looking to sell my brand new in box clutch and flywheel. I paid 150 for the clutch on a eco offer and in total for the flywheel 432 including import tax and vat just looking to get back what I paid for them.
Thanks John
Clutch and flywheel rs4 b7
Clutch and flywheel rs4 b7
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Hi mate dose your 4 paddle judder on pull off?
Current-saloon rs4,Full decat Xpipe miltek,cold air feed,BMC air filter, TTS supercharged, MRC stage 3 L/C F/S,hell s+s brake lines,AP racing rotors + vagbremtechnic bells, kw v3s clifford 650mk2
Gone-audi s3 8p stage2+ with loba lo400 turbo.
Gone-audi s3 8p stage2+ with loba lo400 turbo.
Re: Clutch and flywheel rs4 b7
Yes it does abit you just need to give it a bit more throttle. It takes a bit to get used to and can be a pain in traffic
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Deciding on fitting the standard clutch to my car. I have a fully reworked sachs racing 4 paddle clutch and lightened flywheel to sell all work done by cg motorsports flywheel face skimmed pressure plate fully rework like new, new pucks on the clutch new springs and new release bearing. I will get some picture up tomorrow. What do you guys think this is worth it's essentially a brand new clutch?
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Interested
Re: Clutch and flywheel rs4 b7
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Interested as well.
Sent from my ONEPLUS A6013 using Tapatalk
Sent from my ONEPLUS A6013 using Tapatalk
Current
'07 - Audi RS4 Avant Daytona Grey
'16 - BMW M135i F20 (LCI)
Gone
'02 Audi 8L A3 1.9 TDI (PD)
'03 Subaru Impreza WRX STI
'96 VW Golf VR6
'91 Toyota MR2 NA
'90 Peugeot 205 GTI 1.9
'90 VW Mk2 Golf GTI 8V
'07 - Audi RS4 Avant Daytona Grey
'16 - BMW M135i F20 (LCI)
Gone
'02 Audi 8L A3 1.9 TDI (PD)
'03 Subaru Impreza WRX STI
'96 VW Golf VR6
'91 Toyota MR2 NA
'90 Peugeot 205 GTI 1.9
'90 VW Mk2 Golf GTI 8V
Re: Clutch and flywheel rs4 b7
Here are the picture of the clutch. New ceramic pucks on the clutch, pressure plate refaced new springs and new release bearing. Flywheel skimmed and everything checked by cg motorsports. Have used them before fantastic company
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Parts
- Attachments
-
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Pressure plate
- Attachments
-
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Clutch
- Attachments
-
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Fly wheel
- Attachments
-
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Any other pictures required let me know and make me an offer these are 1700 euros new and this is like brand new
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Just to I'd also be willing to swap this for a decent set of coilovers.
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Clutch and flywheel rs4 b7
Just a wee bump guys still for sale open to sensible offers on ebay also
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Who is online
Users browsing this forum: Pk2904-rs4 and 187 guests