RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

I’m selling a used set of 8.5 x 19 ET40 5x112 BBS CH-R wheels in gloss anthracite with Goodyear Eagle F1 Asymmetric 2 255/35/19 XL tyres.

These were fitted to my B8 S4 and are in excellent condition. There is no kurbing but there are some light scratches around the bolt holes - see photos for condition.

The tyres are also in excellent condition. 2 have approximately 7.5mm of tread and the other 2 have around 5.5mm of tread remaining.

I’m based in Co Durham but can send these via courier for additional cost.

I’m looking to get £1400.

Do you know what the centre bore diameter is (without spigot rings)?

I'm not certain of the centre bore. I think it's 82mm but I'll check and get back to you.

Love these wheels! GLWS


Sent from my iPhone using Tapatalk

John_vts wrote: ↑

Wed Nov 28, 2018 12:47 pm

I'm not certain of the centre bore. I think it's 82mm but I'll check and get back to you.

Thanks - if it's that big and I can get suitable spigot rings, I may be interested for my S6.

Confirmed centre bore of 82mm.

Looking here:

https://www.wheel-size.com/size/audi/s6/2017/

It looks like your S6 has the same centre bore as the B8 S4 that these were fitted to (quoted as 66.5, I always thought it was 66.6) so these should not need any different spigot ring to those they already have.

Oooh, I had it in my head that the S4 had smaller diameter centrings on the hubs. Thanks...I shall ponder more carefully now!

These are still available.

Open to offers...