Hi All
Selling my Revolution Carbon Intake
Went back to the standard setup over two years ago and this has been sitting in my garage ever since. Did approx 5k miles on the car. Kit is in good condition
This kit retails at £599 new, asking £375 deliveredSOLD
Also have Dectane Smoked Rear Light model RA16LRS for B7 Avant
Bought these a while ago, never fitted these to the car, one of the lights have a fault. Not sure which one, might be an easy fix for someone.
Lights could do with a polish.
They are avant fitment, not sure if they'll fit saloon or cab
offers around £110 delivered
Also have a drivers door window switch £10+pp
Thanks for looking
Prit
Revolution Carbon Intake and Some other bits
Revolution Carbon Intake and Some other bits
Last edited by PritJutla on Thu Feb 01, 2018 10:50 pm, edited 1 time in total.
Re: Revolution Carbon Intake and Some other bits
What's the fault on the light ?
Re: Revolution Carbon Intake and Some other bits
You have a pm
- ilsondanni
- Neutral
- Posts: 13
- Joined: Sat Mar 19, 2016 7:53 pm
Re: Revolution Carbon Intake and Some other bits
PritJutla wrote: ↑Sun Jan 28, 2018 10:23 pmHi All
Selling my Revolution Carbon Intake
Went back to the standard setup over two years ago and this has been sitting in my garage ever since. Did approx 5k miles on the car. Kit is in good condition
This kit retails at £599 new, asking £375 delivered
IMG-20180128-WA0007.jpg
Thanks for looking
Prit
Hi,
Do you have any more pictures showing the carbon in more detail?
Have seen some with lacquer peeling and bad scratches!
Also, assuming the adapter for the MAF sensor and everything required is included?
Thanks,
Daniel.
Previous
VW Lupo 1.4E (Taffeta Green)
Seat Leon Cupra R 210 (Ovni Yellow)
BMW 116d Efficient Dynamics Plus (Motorway tractor)
Current
Audi B7 RS4 Cab (Weekend toy) (DAILY)
VW Lupo 1.4E (Taffeta Green)
Seat Leon Cupra R 210 (Ovni Yellow)
BMW 116d Efficient Dynamics Plus (Motorway tractor)
Current
Audi B7 RS4 Cab (Weekend toy) (DAILY)
Re: Revolution Carbon Intake and Some other bits
Intake has everything needed to fit it. The only thing you need will be two hose clamps (jubilee clips) for the hoses that attached to the red intake pipe.
More pics of the intake: Prit
More pics of the intake: Prit
Re: Revolution Carbon Intake and Some other bits
Got a chance to do some testing on the lights themselves. The lights themselves actually work. I think the one of the error canceller may have a fault. Might be repairable for someone.
Took some pics of the lights powered up, the reverse on these is a standard bulb.
Apologies for the crap picture quality, phone camera is up the duff and refuses to focus correctly at times
Prit
Took some pics of the lights powered up, the reverse on these is a standard bulb.
Apologies for the crap picture quality, phone camera is up the duff and refuses to focus correctly at times
Prit
Re: Revolution Carbon Intake and Some other bits
You have a pm
Who is online
Users browsing this forum: No registered users and 173 guests