RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

I am gutted to be selling these after just buying them a few weeks ago from a fellow member on here. I bought them for my S7 but sadly they don't fit. The wheels just catch the brake calipers and no more. I only got the front pair of wheels fitted before I realized the wheels would not turn.

The wheels original came off an Audi B8 RS4.

Up for grabs are genuine Vossen CVT directional alloy wheels. The wheels have been fully refurbished in gloss black and diamond cut machined face which looks amazing.

4x New Goodyear Eagle F1 Asymmertic 2 fitted yesterday at a cost of £735. Tyre size:- 275/35/R20

Wheel details:-
Genunine Vossen CVT directional alloy wheels
5x112 Fitment
66.6 Centre Bore
10.5j x 20inch deep concave
Offset ET30

Looking for £2100 buyer to collect or arrange there own courier. Collection would be from Girvan, South Ayrshire.

Nice set of wheels; is it not possible to use a small spacer (say 3mm) to clear front calliper? You could do a trial with a cheap universal spacer from halfords and then use a hub-centric one from say H&R (with extended bolts) if it works. This is a perfectly acceptable practice.

Otherwise GLWS

The wheels are already out past the wheel archs by about 5mm so would not want them to hang out any more.

Lovely wheels! I've got the vs1 but these look amazing.

Somebody with a b8 buy them!

They won't fit as you bought them without a high enough offer to clear the calipers with spacers. I run the same size Vossen wheels all round in my RS4, but with an offset of around 43.

I checked a couple of website and supposedly the et30 offset should have fitted the S7. I dont know if the S7's have different sized front discs but mine are 400mm dia but have seen other sizes of 356mm & 330mm these may only be the A7 tho.

If some one was not keen on the tyres fitted I would possible sell as rims only.

Any offers?

Still for sale!

Bump

Will these fit a c6 rs on ceramics please ?

Hi SteveG,

I honestly don't know. All I can tell you are the S7 discs are 400mm dia and the wheel just catches the outer edge of the brake caliper.

You would need to try an find a bit of info online or email a vossen dealer.

Cheers

Andy

OK thanks. Ceramics are 420mm so prob not.

Still got these, collecting dust in the garage if any one has a sensible offer.

androidmarrs wrote: ↑

Sun Sep 24, 2017 9:32 pm

Hi SteveG,

I honestly don't know. All I can tell you are the S7 discs are 400mm dia and the wheel just catches the outer edge of the brake caliper.

You would need to try an find a bit of info online or email a vossen dealer.

Cheers

Andy

Mine are 400mm on my S7 too, had unholy hell trying to find any aftermarket discs to fit and after 2 months went with Audi disc as the only option, from memory with pads and fitting they were well over a grand for some big steel non wavy discs, seemed a bit steep to me.