RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Evening All,

I have now sold my B8 S4, so these are surplus to requirements. Have done minimal miles since buying them last year.


Wheels Specs:

- Ronal 8" x 18"
- Part #: 8K0 601 025Q
- PCD 5x112
- Offset ET47
- Centre bore 66.6mm
- Finished in Anthracite Plasticote
- No Kerbing

Tyre Specs:

- Continental Winter Contact TS810S AO 97V EL
- 245/40 R18
- All Tyres manufactured in June 2013

Tread Inner Mid Outer
Wheel 1 7.64mm 8.04mm 7.36mm
Wheel 2 7.19mm 7.15mm 7.13mm
Wheel 3 7.05mm 7.46mm 7.43mm
Wheel 4 6.96mm 7.09mm 7.10mm

Pictures:

Audi Wheels by Peter Strange, on Flickr

Audi Wheels by Peter Strange, on Flickr

Audi Wheels by Peter Strange, on Flickr

Audi Wheels by Peter Strange, on Flickr

Audi Wheels by Peter Strange, on Flickr

Puncture Repair:

Audi Wheels by Peter Strange, on Flickr



Location:

Rugby, Warwickshire (CV22)

Price:

£600ono

Courier can be arranged, at your cost/risk - I would prefer collection due to size and weight.

Any questions please ask

Cheers

Peter

Bargain. Those Continentals cost £500 new - hence with the tyres still at 7.5mm tread, the buyer is pretty much getting a set of wheels thrown in for £100!

My auntie and uncle have those exact same wheels on their B8 as their winter set up, that wheel design is a cinch to clean in the winter time too

Ian- Thanks, mytyres currently retailing for £592.80 a set.

http://www.mytyres.co.uk/cgi-bin/rshop. ... p=R-187253

Effectively the wheels are free

Now on eBay here: http://www.ebay.co.uk/itm/-/121857641669?

Hi There

Will these fit my B7 RS4 2007?

Assuming they clear the brakes (I think most 18" will) you'll need spigot rings to reduce the centre bore to 57.1mm - readily available.

I'm happy to trial fit them to your car before you buy if it helps

Cheers

Pete

Thanks yoof for your kind offer but managed to get a set from agillett that fit without a spigot part 8E0601025AH, thanks again though.

Will these fit a C5 RS6?

Steveo wrote:Will these fit a C5 RS6?

You will need spigot rings to reduce the centre bore down to 57.1mm

Steven

I'm pretty sure I have a set of 19's from an A6 Avant which would fit your C5.

I just bumped the post so it should be pretty near the top of the list.

Rich

Now reduced to £575: http://www.ebay.co.uk/itm/121859121225? ... 1555.l2649

Cheers

Pete

Bump -Still here