Wanted rs4 b7 coilovers
Wanted rs4 b7 coilovers
DRC pipe gave up today so on the lookout for a set of coilovers.
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
-
- 2nd Gear
- Posts: 182
- Joined: Sun Jun 21, 2015 5:33 pm
Re: Wanted rs4 b7 coilovers
I went the pss9 and have some light squeaks over bumps, and if I did it again I might have done kw-v3 or the öhlins. But still very happy with how the ride/feel and ride on settting 5 (1-9, 1 hardest). Just some of my feedback. Good luck!Quango86 wrote:DRC pipe gave up today so on the lookout for a set of coilovers.
-
- Neutral
- Posts: 2
- Joined: Wed Apr 24, 2019 12:09 pm
Re: Wanted rs4 b7 coilovers
I'm at the same point - can't decide what to get.
I toyed with the idea of the non adjustable AP's then moved back to the Bilsteins but what's peoples opinion on the B14 vs BC racing ones
Sorry to hijack your post
I toyed with the idea of the non adjustable AP's then moved back to the Bilsteins but what's peoples opinion on the B14 vs BC racing ones
Sorry to hijack your post

Re: Wanted rs4 b7 coilovers
I went for koni dampers after speaking to Steve from crs looking forward to trying them as I would like to retain a bit of comfortI'll never grow up wrote: ↑Thu May 02, 2019 12:14 pmI'm at the same point - can't decide what to get.
I toyed with the idea of the non adjustable AP's then moved back to the Bilsteins but what's peoples opinion on the B14 vs BC racing ones
Sorry to hijack your post![]()
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Wanted rs4 b7 coilovers
Steve's (Shockerboy?) set up gets good reviews. Be keen to see how you get on with them as I am likely to go this route when my DRC goes south.
Sent from my ONEPLUS A6013 using Tapatalk
Sent from my ONEPLUS A6013 using Tapatalk
Current
'07 - Audi RS4 Avant Daytona Grey
'16 - BMW M135i F20 (LCI)
'53 - Land Rover Range Rover Vogue 4.4 V8
Gone
'02 Audi 8L A3 1.9 TDI (PD)
'03 Subaru Impreza WRX STI
'96 VW Golf VR6
'91 Toyota MR2 NA
'90 Peugeot 205 GTI 1.9
'90 VW Mk2 Golf GTI 8V
'07 - Audi RS4 Avant Daytona Grey
'16 - BMW M135i F20 (LCI)
'53 - Land Rover Range Rover Vogue 4.4 V8
Gone
'02 Audi 8L A3 1.9 TDI (PD)
'03 Subaru Impreza WRX STI
'96 VW Golf VR6
'91 Toyota MR2 NA
'90 Peugeot 205 GTI 1.9
'90 VW Mk2 Golf GTI 8V
Re: Wanted rs4 b7 coilovers
Will keep you posted. Had a few cars over the years with coilovers but am getting older now and just wanted a bit of comfort. Yeah that's the man takes the time on the phone to explain them so I'm hoping for good things
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.
Re: Wanted rs4 b7 coilovers
the finish on the bilstein coilovers lasts only a few months-with serious surface corrosion in less than 12,thats using the car when no salt on roads and greasing up the coilover threads
they work well enough but would never buy another set -waste of £800 odd quid at the time
they work well enough but would never buy another set -waste of £800 odd quid at the time
Who is online
Users browsing this forum: No registered users and 64 guests