Thanks, I have had a few offers on eBay but nothing serious. I’m not sure what you mean by the code, I never needed a code to work it. Yea you might be right, I just grabbed a few quick photos, I’ll see how I get on and maybe take some better ones.Lady Penelope wrote: ↑Fri Nov 16, 2018 9:51 pmHello, we sold one on EBay last week for just under £200. I didn't think it would shift but a late bid secured it, we had it listed on FB groups too but no one was serious even at £200.
If I may, your listing would benefit from stating whether you have the code with it. I would also clean the screen on the pictures and relist with the better pictures... I am probably just fussy but the screens are notorious for degrading over time..... If yours is good show it as so.
GLWS
P
Thanks, very kind.Lady Penelope wrote: ↑Fri Nov 23, 2018 1:00 amGuy on the FB RS4OC page after one. If you to PM contact details I'll forward on if that helps?
P
It will work but you will need a kuftec wiring adapter , an aerial adapter and there will be gaps on either side of the face plate ( not huge but annoying ).The colour of the rnse is also slightly different compared to the B5 HVAC unit . You can get someone to make /adapt the face plate but it is expensive or have a go yourself at adding strips to the ends and painting to match . Also iirc the rnse faceplate has to be trimmed along the whole bottom to fit . There is also the issue of the clock on the navigation being out of sync but again doable but you need a can gate module and the guy who made them will not make anymore . If your lucky one might come up for sale . If I'm honest the rnse is way out of date for all the hassle involved to get it to fit . Your better of getting one of the pioneer units with much more funtions for not much more and a faceplate .
The unit needs a security code to first recognise a vehicle. Once installed and the code is entered it "normally" recognises the vehicle, even after a battery swap.
Will I find this code in the book?
Is the code not in the rnse handbook ? I know it is for the rnsd .
I’ll have a look when I get home, thanks.
Many thanks. Seems too much of a hassle. I'll look for alternatives.dhali wrote: ↑Wed Nov 28, 2018 9:30 amuIt will work but you will need a kuftec wiring adapter , an aerial adapter and there will be gaps on either side of the face plate ( not huge but annoying ).The colour of the rnse is also slightly different compared to the B5 HVAC unit . You can get someone to make /adapt the face plate but it is expensive or have a go yourself at adding strips to the ends and painting to match . Also iirc the rnse faceplate has to be trimmed along the whole bottom to fit . There is also the issue of the clock on the navigation being out of sync but again doable but you need a can gate module and the guy who made them will not make anymore . If your lucky one might come up for sale . If I'm honest the rnse is way out of date for all the hassle involved to get it to fit . Your better of getting one of the pioneer units with much more funtions for not much more and a faceplate .
Users browsing this forum: No registered users and 46 guests
