WANTED - RS6 2015 -
WANTED - RS6 2015 -
Mate of mine is looking to get into a facelift 6
Flexible on colour and mileage
Spec wise - Pan roof and Camera are must haves
Budget circa £60k
Anything out there, give me a shout and I'll pass on your details to him
Cheers
Flexible on colour and mileage
Spec wise - Pan roof and Camera are must haves
Budget circa £60k
Anything out there, give me a shout and I'll pass on your details to him
Cheers
2018 Brabus G63 Widestar
2017 RS6 PE -Nardo, Air, HUD, Pan.....Millie Non Res
2015 RS6 - with Added Milltek
2015 RRS - utter sh1te
2010 X5 4.0D M Sport Every conceivable extra
2010 X5 4.0D M Sport
2009 R8 V10 Manual
2004 Lambo Gallarado Manual
3 x 997 C4S / C2s
2003 Fezza 360 Spider - Airfix kit build quality
2007 M3 - car number 2 in the UK
2006 RS4 Avant
2000 RS4 MTM Stage 3 - R55 BYE
2001 RS4 - R500 FOR
1990 Dimma Cosworth H20 COS
2003 996 DMS Turbo
multiple 205's Dimmas
2017 RS6 PE -Nardo, Air, HUD, Pan.....Millie Non Res
2015 RS6 - with Added Milltek
2015 RRS - utter sh1te
2010 X5 4.0D M Sport Every conceivable extra
2010 X5 4.0D M Sport
2009 R8 V10 Manual
2004 Lambo Gallarado Manual
3 x 997 C4S / C2s
2003 Fezza 360 Spider - Airfix kit build quality
2007 M3 - car number 2 in the UK
2006 RS4 Avant
2000 RS4 MTM Stage 3 - R55 BYE
2001 RS4 - R500 FOR
1990 Dimma Cosworth H20 COS
2003 996 DMS Turbo
multiple 205's Dimmas
Re: WANTED - RS6 2015 -
If I was to buy an rs6 now I’d seriously consider this one...
https://rover.ebay.com/rover/0/0/0?mpre ... 2723249245
https://rover.ebay.com/rover/0/0/0?mpre ... 2723249245
Re: WANTED - RS6 2015 -
That is a seriously nice car!
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: WANTED - RS6 2015 -
Correct I do. But it's not a Performance. I think this was Jason's old car, very famous on social media as he is the UK gepfeffert dealer and it had the number plate KW 10WER. Then a guy called Ollie owned it.
Last edited by MikeFish on Mon Sep 17, 2018 8:50 am, edited 1 time in total.
Re: WANTED - RS6 2015 -
If I was looking to buy it'd be this one. I know the owner so I know its been looked after properly. And factory ceramics, not retrofit.
But it may have sold already. Higher mileage but its newer and a Performance.
https://www.pistonheads.com/classifieds ... es/9037031
But it may have sold already. Higher mileage but its newer and a Performance.
https://www.pistonheads.com/classifieds ... es/9037031
Re: WANTED - RS6 2015 -
If it’s Jason’s old car that explains the ramics, he specs ramics on every new car he buys, had them on his r8, b9 rs4 and also his huracan performante. That guy seriously spares no expense. His b5 build totalled 60k and that thing looks like it’s just come off the production line.MikeFish wrote: ↑Mon Sep 17, 2018 8:48 amIf I was looking to buy it'd be this one. I know the owner so I know its been looked after properly. And factory ceramics, not retrofit.
But it may have sold already. Higher mileage but its newer and a Performance.
https://www.pistonheads.com/classifieds ... es/9037031
Mike is there actually any difference in engine components with standard vs PE? Or is it just more software/power and a ‘sports exhaust’? There is probably a lot more to it but I haven’t looked into it that much.
Re: WANTED - RS6 2015 -
So far no official hardware changes, just higher boost and did I imagine it or was the red line lifted slightly? However, somebody told me that the Performance used different spark plugs. The non PE is spark plug change every 4 years but the PE is every 2 years. Not sure if Audi use the PE plugs in all RS6s now as there were a lot of reports of misfires.
Re: WANTED - RS6 2015 -
I do want one of these. I wonder how much I would get for mine with 49k Miles.
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Who is online
Users browsing this forum: Lopseychops and 61 guests