Its pains me to do this however unexpected massive tax bill has left me no alternative
My beloved RS4 in sprint blue is going up for sale
MOT till April 2018 however i'll stick another year on it for the buyer, also due a small service which is just the oil and filter, so I will do this also
2007 1st registered 01/09/2007 making it a 57 plate car
Paint work is good but not brilliant, it does have some stone chips at the front mainly cause I was always up some ones arse haha, I machined polished it and gave it 2 coats of wax 2 years ago and every time I wash it, it still shines like a diamond in a goats ass
Car spec as follows
2007 sprint blue saloon
74k miles FSH
wing backs
carbon trim
19" original wheels powder coated satin black
Optics have been wrapped matt black
CAF with piper cross filter
TRUPS LED DRL & side light bulbs
B16 Coil overs (fitted May 16) hunter wheel alignment was done and I replaced nearly all suspension bolts when fitting the coil overs
goodridge brake lines
H&R spacers fitted 10mm front 15mm rear
H&R uprated ARB's
Clutch was replaced in October 15 and gearbox came out again in December 16 to get the braided clutch pipe installed
Milltek cat back non-res system with black tips
Pre cats gutted by MRC and decoke/deflap done by MRC in 2016 and treated to the stage 2 remap power figure was 439PS with 481NM
EBC yellow stuff pads in the front & red stuff in the back
Tyres are Michelin PS2's all with good tread left
Car is an absolute joy to dry, and I cant believe I'm doing this but needs must
unsure how to price this as the market on these has dropped recently however with the mods ive down im going to ask £18,000
for more pictures or more info on the car please email gazza.warren@sky.com
2007 57 Plate B7 RS4 Saloon MRC Stage 2
-
- 3rd Gear
- Posts: 351
- Joined: Tue Jul 02, 2013 8:32 pm
- Location: Aberdeenshire
2007 57 Plate B7 RS4 Saloon MRC Stage 2
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Re: 2007 57 Plate B7 RS4 Saloon MRC Stage 2
Pm’d you
2007 B7 RS4
Previously
C5 RS6 Saloon Avus, Phase 2 Viper Remap, Wagners, Full Milltek, Hotchkis Arb's, 390mm C6 Brake's, H&R Coilovers
Previously
C5 RS6 Saloon Avus, Phase 2 Viper Remap, Wagners, Full Milltek, Hotchkis Arb's, 390mm C6 Brake's, H&R Coilovers
Re: 2007 57 Plate B7 RS4 Saloon MRC Stage 2
dunno about the market price dropping-think it was just chrimbo-seen a few holding out for strong money now
the bottom price cars are just that-bottom-no history of clutch,drc holding on by a rusty pipe etc-sorted cars will always be a good buy...glws
the bottom price cars are just that-bottom-no history of clutch,drc holding on by a rusty pipe etc-sorted cars will always be a good buy...glws
-
- 3rd Gear
- Posts: 351
- Joined: Tue Jul 02, 2013 8:32 pm
- Location: Aberdeenshire
Re: 2007 57 Plate B7 RS4 Saloon MRC Stage 2
car no longer for sale at this time now, as managed to raise enough funds to settle my tax bill
RS4 B7 Saloon Milltek Cat back, CAF with piper cross panel, Wrapped optics black, Satin black wheels, TRUPS LED front DRL's & sides, goodridge braided hoses, H&R 10/15mm spares front/rear
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Bilstien B16 coilovers with H&R anti roll bars
MRC stage 2 deflapped, precat gutted 439ps 481nm torque
1/4 mile time 12.884sec
My clutch replacement write up can be found here viewtopic.php?f=35&t=116929&start=15
Re: 2007 57 Plate B7 RS4 Saloon MRC Stage 2
Well done paying off the Tax bill and very pleased you can keep your smart RS4. I personally have a strong dislike of the Tax Man
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: 2007 57 Plate B7 RS4 Saloon MRC Stage 2
Glad you could keep it. Looks a proper nice one too
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Re: 2007 57 Plate B7 RS4 Saloon MRC Stage 2
I'm also very pleased for you, result. I was disappointed when you told me as I was nigh on committed to buy but every cloud .... I'm very happy with my project and I have funds to get it to this spec.
Good luck Matt
Oops just realised this isn't the one but similar story
Good luck Matt
Oops just realised this isn't the one but similar story
Who is online
Users browsing this forum: No registered users and 153 guests