Rs4 b7 phantom black saloon

Cars For Sale / Wanted Only
Post Reply
Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Rs4 b7 phantom black saloon

Post by Quango86 » Thu Apr 02, 2020 4:57 pm

£16000ono
2006 phantom Black rs4 for sale (registered 1/3/2006)
77880 miles(still in use so will increase Slightly )
4 previous owners
Heated bucket seats
Carbon inlays
Winter pack
Ski hatch.
Adaptive headlights
DRL
Private plate removed

Service history
My car benefits from a full audi service history apart from the last service which was carried out at MRC scotland.
Huddersfield audi 4/5/‪07 11148‬mls
Huddersfield audi 13/10/‪08 19321‬mls
Huddersfield audi 2/3/‪1 26027‬ mls
Portadown audi 3/11/‪11 37377‬mls (longlife)
Aberdeen audi 14/12/13 no milage rec (longlife)
Dundee audi 17/11/‪15 49651‬mls
Edinburgh audi 1/10/‪16 57608‬ mls
Hamilton audi 14/11/‪17 64457‬ mls
Ayr audi 31/12/‪18 70048‬ mls
MRC Scotland 18/12/19

BRAKES
Front discs reyland straight grooves and brembo pads replaced (March 19) with new spring and pin set
Front calipers rebuilt (March 19)
New front brake flexi x2 (march19)
Brake fluid also changed at this time.
Receipt for new discs 2017.Had rear discs resurfaced (may 19)

SUSPENSION
When I purchased the car it was on the original DRC. This was replaced
Koni shocks (April 19)
H and r springs (Dec 19)
I also have replaced all front arms with meyle HD control arms with new drop links. At this time I also replaced the 2x front wheel bearings. (August 19). Original springs will be included.
Hunter tracking (Aug 2019)

Clutch
New Rock auto dual mass flywheel (Jan 19)
New LUK clutch kit (2019)
At this time the gearbox oil and diff oil where also changed.

Wheels
Wheels powder coated in black chrome (July 19) in excellent condition
4X uni Royal rainsport3 tires (Jan 19)
8MM front and rear h and r spacers.

EXHAUST
This was on the car previous to me buying it. Full non res milltek with valves, milltek decat pipes (may 2013). The car sounds amazing and is quiet enough with the valves shut for my girl to sleep in the back.

MRC WORK
Full carbon clean. Full stage 2 manifold deflapped with map to suit. Stage 2 map with launch control ,flat shift, switchable crackle and cold start delete. On the dyno the car made 456hp 522nm. I also had a k and n panel filter fitted. I also had linear power map for non sport mode which is a lot smoother to drive. A full service including plugs was all done and springs fitted. This was all carried out (Dec 19).

Modifications
Only modifications carried out are a kenwood dmx dab head unit fully wired in with correct plugs( original included). This has apple/android car play GPS dab plus aerial and handfree. I have also fitted black badges front and rear(originals included) and carbon wrapped rear boot trim.

Faults
Headlight module fault on code J667. I have never replaced this to date as I was fixing other mechanical things. The headlight always has always worked. There is also very slight bubbling on the front arch passenger side which is very common. Usual stone chips on front of car but overall body work in amazing condition have machine polished it and ceramic waxed regularly. There is also a small piece of lacquer peel which is also common.

As you can see I have spent a lot on the car to get it where I was happy with it. There will also be a few bits I have missed. New maf and 02 sensor to be fitted this week. I have receipts for thousands of pounds spent on the car. Any questions please don’t hesitate to ask.
16000 ono
Thanks John
Attachments
IMG_20200322_152616.jpg
IMG_20200322_152622.jpg
Last edited by Quango86 on Wed Apr 29, 2020 8:43 pm, edited 2 times in total.
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Thu Apr 02, 2020 4:58 pm

More pictures
Attachments
IMG_20200322_152540.jpg
IMG_20200322_152531.jpg
IMG_20200322_152553.jpg
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Thu Apr 02, 2020 4:58 pm

Small flaws
Attachments
IMG_20200322_152517.jpg
IMG_20200322_152602.jpg
IMG_20200322_152548.jpg
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Thu Apr 02, 2020 5:00 pm

Interior
Attachments
IMG_20191102_140053.jpg
IMG_20191102_133834.jpg
IMG_20200128_182325.jpg
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Thu Apr 02, 2020 6:04 pm

More interior
Attachments
IMG_20191102_131744.jpg
IMG_20191102_131446.jpg
IMG_20191102_131428.jpg
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Tue Apr 28, 2020 10:13 pm

New maf and o2 sensor fitted this week.
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

User avatar
Covkiller
Top Gear
Posts: 2349
Joined: Fri Mar 28, 2008 3:44 pm
Location: Coventry

Re: Rs4 b7 phantom black saloon

Post by Covkiller » Wed Apr 29, 2020 8:25 am

16k buried too deep in the description. I'd advise you put it at the top with a £ sign.
GWLS
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Wed Apr 29, 2020 8:42 pm

Covkiller wrote:
Wed Apr 29, 2020 8:25 am
16k buried too deep in the description. I'd advise you put it at the top with a £ sign.
GWLS
Thanks for the input just tried to get as much detail in I will add to the top
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Mon May 25, 2020 11:05 pm

Still for sale haven't really promoted it due to lockdown. Any questions feel free to ask I'm happy to discuss over the phone do a video walk round etc

Also on ebay aswell.


Thanks 👍
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Sat Jun 06, 2020 5:23 pm

Still for sale I have taken some video walk rounds of the car inside and out if anyone wants a better look fur to the current climate
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Quango86
2nd Gear
Posts: 151
Joined: Thu Jan 31, 2019 2:08 pm

Re: Rs4 b7 phantom black saloon

Post by Quango86 » Wed Jun 10, 2020 7:16 am

Price reduced to 15250 ono
B7 saloon, koni Shocks and h and r springs, h and r spacers 8mm f+r, milltek non res with valves, milltek d/ps, k and n filter, full mrc carbon clean, mrc stage 2 with l/c and f/s 456bhp 522nm.

Post Reply

Return to “Cars”

Who is online

Users browsing this forum: No registered users and 75 guests