LOBA TTRS front 8 Pot upgrade brake kit

2.5 I5 20v TFSI - 335 bhp
2.5 I5 20v TFSI - 355 bhp (Plus)
Post Reply
User avatar
supersi
3rd Gear
Posts: 406
Joined: Tue Oct 13, 2009 7:40 pm
Location: UK

LOBA TTRS front 8 Pot upgrade brake kit

Post by supersi » Fri Mar 30, 2012 6:18 pm

LOBA TTRS front 8 Pot Brake Upgrade KIt

48 Vane Directional rotors

Bolt On Replacement no other modifications to carry out  comes with all needed hardware (PLUG&PLAY)

The assembly uses " Float in the Bell" Technology

float is limited to 0.2mm compared to 0.5-0.7mm float in float in the disc systems such as Alcon or less capable AP racing setups

Custom rate developed bobbin springs allow design axial and radial float whilst maintaining OEM levels of NVH

Assembly's proven to demonstrate excellent heat management by design in testing due to axial flow of air from behind the bearing to the centre of the disc via 48 vanes and a 17mm air gap, provision is also made for front face cooling via recessed vents on the reverse bell face

All components from rotors to washers are available separately this is truly a disc assembly for life

Design requirements was nominally 10-12 track laps at competitive driver speeds, surpassed in initial testing by professional drivers, kit currently being used on a tarmac rally TTRS

Disc Bell CNC machined in the UK by a supplier to race teams at the pinnacle of Motorsport

Disc Rotor is by AP Racing and is cast in the UK

Disc finishing is either radially drilled via CNC to avoid hotspots or curved groove rebuild and refinishing service facility available

Disc Supplied assembled & weigh only 8.7kg each disc

Rotor size is 362mm thickness is 32mm (drilled or grooved discs available)

uses a pair of supplied brembo 8 pot callipers (Optionally available colour of your choice)  and comes with braided steel brake lines

Choice of a range of pads to meet your needs  

Optionally available with temperature sensing paint applied set to 430/560/610 degrees

Please email for a price as pad options varies due to pad choice

S.sharp@loba-motorsport.com


Image

Image


Image

Image

Image

Image[/quote]
Last edited by supersi on Thu Oct 18, 2012 10:43 am, edited 1 time in total.
Email : simon@turboengineering.de Phone : +44 (0)7825 884236 FaceBook : https://www.facebook.com/TheTurboEngineers

User avatar
Timster
Cruising
Posts: 2821
Joined: Tue Oct 26, 2010 4:55 pm
Location: Herts

Re: LOBA TTRS upgrade brake kit

Post by Timster » Sat Mar 31, 2012 12:05 am

DK ?
VW Toe-rag V6 R-line.... no curry hooks...wtf ?
Gone: Avus Avant B7 RS4.... plus curry hooks !

Post Reply

Return to “TTRS / TTRS Plus (Mk2 Typ 8J) 2006–2014”

Who is online

Users browsing this forum: No registered users and 37 guests