Wingback retro fit in B8, how to resolve side airbag light
Wingback retro fit in B8, how to resolve side airbag light
Hi all,
Was hoping my old C5 RS6 scan tool would work, as I have an airbag light on.
Can anyone suggest a scan tool, used this on my old RS6
Also his came up today
Any ideas
Sent from my iPhone using Tapatalk
Was hoping my old C5 RS6 scan tool would work, as I have an airbag light on.
Can anyone suggest a scan tool, used this on my old RS6
Also his came up today
Any ideas
Sent from my iPhone using Tapatalk
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: What hand held scan tool works with B8
VCDS works for me, the programme is loaded onto a laptop and then you plug the cable in and connect. You can do a lot of stuff with it.
Odd how that airbag light has just popped up, I did notice when you first posted pictures of your car that the Bucket seats are retrofitted and obviously the steering wheel re-trimmed. So maybe a connector/wire come loose? It'll have logged a code which will help point you in the right direction. If your anywhere near me, then I'll happily pull the codes for you.
Odd how that airbag light has just popped up, I did notice when you first posted pictures of your car that the Bucket seats are retrofitted and obviously the steering wheel re-trimmed. So maybe a connector/wire come loose? It'll have logged a code which will help point you in the right direction. If your anywhere near me, then I'll happily pull the codes for you.
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Re: What hand held scan tool works with B8
Surrey Sam wrote:VCDS works for me, the programme is loaded onto a laptop and then you plug the cable in and connect. You can do a lot of stuff with it.
Odd how that airbag light has just popped up, I did notice when you first posted pictures of your car that the Bucket seats are retrofitted and obviously the steering wheel re-trimmed. So maybe a connector/wire come loose? It'll have logged a code which will help point you in the right direction. If your anywhere near me, then I'll happily pull the codes for you.
Thanks @surreysam yep you know your stuff, buckets were retro fitted, notice today after you mentioned both yellow plus under both front seats have their 2 wires cut I’m assuming, rather then both snapping together
I’m based in Bedfordshire so assuming your a bit of drive from me...
I’m MacBook man, so don’t have a laptop handy to me.. hence the hand held option request...
Sent from my iPhone using Tapatalk
Re: What hand held scan tool works with B8
fault code 01217/01218
https://r.tapatalk.com/shareLink?share_ ... are_type=t
My issue sounds like this a bit, however, why would it just come on if it is this???
Sent from my iPhone using Tapatalk
https://r.tapatalk.com/shareLink?share_ ... are_type=t
My issue sounds like this a bit, however, why would it just come on if it is this???
Sent from my iPhone using Tapatalk
Re: What hand held scan tool works with B8
Contacted previous owner who said when they were professionally installed they would have had resistors fitted for air bags..
What’s the likelihood they’ve failed? Where would I find them to check??
Sent from my iPhone using Tapatalk
What’s the likelihood they’ve failed? Where would I find them to check??
Sent from my iPhone using Tapatalk
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: What hand held scan tool works with B8
Resistors and professional I wouldn't perhaps use together. The buckets don't have side airbags in them, so like I commented in that thread you linked, the car needs to be re-coded so that it doesn't look for them. The resistors are a work around to try fool the system.
So I'd suggest that's where your problem is (the cut wires). It may be a resistor that has failed, incorrectly sized or a solder joint gone bad, you'll need to look under the seat as that's where the plugs are. Undo all 4 seat rail bolts and then tip the seats backwards for a better look, grab a picture and then post back and I might be able to see what's going on.
So I'd suggest that's where your problem is (the cut wires). It may be a resistor that has failed, incorrectly sized or a solder joint gone bad, you'll need to look under the seat as that's where the plugs are. Undo all 4 seat rail bolts and then tip the seats backwards for a better look, grab a picture and then post back and I might be able to see what's going on.
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Re: What hand held scan tool works with B8
Surrey Sam wrote: ↑Mon Oct 01, 2018 10:09 amResistors and professional I wouldn't perhaps use together. The buckets don't have side airbags in them, so like I commented in that thread you linked, the car needs to be re-coded so that it doesn't look for them. The resistors are a work around to try fool the system.
So I'd suggest that's where your problem is (the cut wires). It may be a resistor that has failed, incorrectly sized or a solder joint gone bad, you'll need to look under the seat as that's where the plugs are. Undo all 4 seat rail bolts and then tip the seats backwards for a better look, grab a picture and then post back and I might be able to see what's going on.
Cheers again, will give it a go at the weekend, unless the way forward is getting it coded??! I
Re: What hand held scan tool works with B8
Pics of passenger side plugs??
Sent from my iPhone using Tapatalk
Re: What hand held scan tool works with B8
Any views of the pics..jangol wrote:
Pics of passenger side plugs??
Sent from my iPhone using Tapatalk
Want to see what thoughts are on this subject
Sent from my iPhone using Tapatalk
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: What hand held scan tool works with B8
Well the Blue and Black wires have been cut and they're for the side airbags, have you un-ravelled the tape going down the side of the yellow connector to see what going on there. That's your side airbag plug and where the resister should be I'd have thought.
Here's mine (normal seats) for reference.
Here's mine (normal seats) for reference.
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Re: What hand held scan tool works with B8
Thanks for pic,Surrey Sam wrote:Well the Blue and Black wires have been cut and they're for the side airbags, have you un-ravelled the tape going down the side of the yellow connector to see what going on there. That's your side airbag plug and where the resister should be I'd have thought.
Here's mine (normal seats) for reference.
Will take a look under the tape...
P’s might take you up on your offer & drive down for access to your machine 🤭
Sent from my iPhone using Tapatalk
- Surrey Sam
- Cruising
- Posts: 4195
- Joined: Tue Nov 27, 2012 7:34 pm
- Location: Sussex
Re: What hand held scan tool works with B8
Sure thing
Sepang Blue B8 RS4, MY14, All option packs, B&O, Adv Key, Adapt Cruise, Pan Roof, Akrapovic Titanium Exhaust, + more.
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
Previous - Sprint Blue B7 RS4 Avant, Ceramics, Sunroof, SS+, Buckets, FBSW, Bluetooth, 2010+ RNSe
Previous - Phantom Black B7 RS4 Avant, Black Optics, Titan pack, SS+, Buckets, FBSW
What hand held scan tool works with B8
Professional install my butt.. Not an ounce of solder anywhere. Anyhow, any ideas on how I can resolve this issue, do the black & blue cables from main loom need to join the yellow plug & resistor also?
or just need a good purchase between plug & resistor
Sent from my iPhone using Tapatalk
or just need a good purchase between plug & resistor
Sent from my iPhone using Tapatalk
Re: What hand held scan tool works with B8
Quality bodging!jangol wrote: ↑Sun Oct 07, 2018 4:52 pmProfessional install my butt.. Not an ounce of solder anywhere. Anyhow, any ideas on how I can resolve this issue, do the black & blue cables from main loom need to join the yellow plug & resistor also?
or just need a good purchase between plug & resistor
Sent from my iPhone using Tapatalk
B5 B6 B7 B9
Re: What hand held scan tool works with B8
Noted & trying to resolve,
What resistor amp should I be using??
Also any write ups of what needs to be done... or is it just the plug that needs a resistor.
Trying to make things right
Sent from my iPhone using Tapatalk
What resistor amp should I be using??
Also any write ups of what needs to be done... or is it just the plug that needs a resistor.
Trying to make things right
Sent from my iPhone using Tapatalk
Who is online
Users browsing this forum: AndyBrad and 136 guests