Forge intake hoses - free kit if you can help

Post by **Revolution** » Wed Nov 16, 2016 11:06 am

Hi Guys

Were in the final stages of our stage-1 intake kit for the B8 RS4/RS5 and need the help of a member...

We've had the intakes pipes made from a set of factory OEM pipes but they're still a little but out on the angle and overall length.

Drawings checked and they're fine but were not 100% happy with the kit when we fitted them to our RS4 demo & need a customer local to Forge to pop
down for a couple of hours.

It could just be our car is out as its a 2014 car but they want to try it for themselves before we sign off this project and get the stock ordered in bulk.

Does anyone live near Gloucester where Forge HQ is located..?

Their address is:
Bristol Road
Gloucester
GL2 5EU

Happy to give a set of intake hoses away free to say thanks for your assisting us & do a deal on the air filters also if needed.

Please PM myself or little Glen with your telephone number & car details and we will get a date and time organised to suit you.

Thanks
big Glenn

Post by **Surrey Sam** » Wed Nov 16, 2016 6:07 pm

Glenn I'm just checking into a hotel in Gloucester, I can do tomorrow afternoon if that helps? Mine is also a 2014.

Post by **Revolution** » Wed Nov 16, 2016 6:23 pm

Hi Sam

If you can that would be awesome, I have let them know so they will be expecting you.

If you go into reception when you get there and ask to see Alex he will sort you out.

Cheers

Little Glen

Post by **Surrey Sam** » Wed Nov 16, 2016 7:38 pm

No problem. Should be there between 12-13:00 depending on how quickly work goes.

Post by **Revolution** » Thu Nov 17, 2016 10:20 am

Excellent. I will let them know.

Cheers again

Glen

Post by **Surrey Sam** » Thu Nov 17, 2016 1:32 pm

They're taking a look now.

I must say, the RS6 intake they have done looks a good quality item.

Post by **MikeFish** » Thu Nov 17, 2016 2:17 pm

Surrey Sam wrote:They're taking a look now.

I must say, the RS6 intake they have done looks a good quality item.

Air intake?

Post by **Surrey Sam** » Thu Nov 17, 2016 3:05 pm

MikeFish wrote:
Surrey Sam wrote:They're taking a look now.

I must say, the RS6 intake they have done looks a good quality item.
Air intake?

Yes Mike, I think that it's a Forge item rather than Revolution.

Post by **MikeFish** » Thu Nov 17, 2016 3:08 pm

Is there any carbon?

Post by **Surrey Sam** » Thu Nov 17, 2016 3:17 pm

It's a Carbon Fiber piece. Apparently an employee there made the mould and the CF work outsourced.

RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Forge intake hoses - free kit if you can help

Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Re: Forge intake hoses - free kit if you can help

Who is online