Page 1 of 1
Locking wheel nuts for 10mm spacers
Posted: Sun Mar 27, 2016 11:16 pm
by NME
Hi,
Just wondering if someone can confirm the suitable size and spec for a set of locking wheel nut please?
Obviously they will need to be 10mm longer, but if anyone has a direct link to a suitable set that are reputable and suitable to keep my 20" V SPOKES from being stolen, that would be great.
Re: Locking wheel nuts for 10mm spacers
Posted: Mon Mar 28, 2016 7:22 am
by Brooner
Got my spacers and extended bolts with locking nut from Revolution very happy I just needed to pad out the bolt cover for the locking nut as the diameter is a touch smaller
Re: Locking wheel nuts for 10mm spacers
Posted: Mon Mar 28, 2016 9:27 pm
by rspj
I tryed to get wheel spacers from revolution they only do 12 or 15 mm which I think be a problem do any one think?
Re: Locking wheel nuts for 10mm spacers
Posted: Tue Mar 29, 2016 7:42 am
by Brooner
That's strange as I got my 10mm spacers and bolts with locking nut from Glenn
But I see the no longer have H&R spacers on there site
Re: Locking wheel nuts for 10mm spacers
Posted: Tue Mar 29, 2016 8:51 pm
by NME
Thanks guys.
Just checking, is the standard bolt an M14 25mm bolt?
Cheers.
Re: Locking wheel nuts for 10mm spacers
Posted: Wed Mar 30, 2016 11:02 am
by BMW2RS4
NME wrote:Thanks guys.
Just checking, is the standard bolt an M14 25mm bolt?
Cheers.
Standard OEM bolt is M14 x 1.5 and 27mm length with a R13 radius seat. In my experience, bolts can be as much as 3mm longer without issue so I would imagine that the bolts used with a 12mm spacer should also work with the 10mm spacer.
Hope this helps