Finally got the car back after being sent away for TTE1000 conversion many many moons ago (1005bhp/1199nm on a 155k mile engine )
The original plan was to buy 2nd hand parts for conversion/upgrade etc. so the build could go smoothly, since it didn't anyway, all that pre-flight effort was for bugger all. That aside, I do have the following parts now left over from the original car & build if they are of any use to anyone? I may over time chuck a bit of cash into getting the parts fully refreshed like send the gearbox to Teo for conversion and turbos to TTE for the same but for now they are just as they came off the car.
Original Parts - 155k miles of use
Gearbox - needs solenoids replacing.
2x OEM intercoolers (good condition)
2x OEM Turbos (good condition)
1x OEM Exhaust full system
10x OEM Audi injectors
10x Coil Packs
Newish Parts
2x Loba HPFP
5x Porsche Turbo Injectors (9A111012872)
TTE1000 Build and Left Overs
-
- 2nd Gear
- Posts: 131
- Joined: Fri Aug 07, 2015 10:35 am
TTE1000 Build and Left Overs
Esben Business IT Solutions - http://www.esben.co.uk
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
-
- Neutral
- Posts: 19
- Joined: Fri Nov 12, 2021 12:05 pm
Re: TTE1000 Build and Left Overs
I'd be interested in the exhaust if it's still available?
(I'm thing of taking the wadding from the back boxes to get a bit more noise)
(I'm thing of taking the wadding from the back boxes to get a bit more noise)
-
- Neutral
- Posts: 18
- Joined: Sun Aug 15, 2021 4:45 pm
Re: TTE1000 Build and Left Overs
How much for porsche injectors?
-
- 2nd Gear
- Posts: 131
- Joined: Fri Aug 07, 2015 10:35 am
Re: TTE1000 Build and Left Overs
Sorry on the delay in replying, bloody hectic this end!
I paid about £200 each for them and they have been in the engine for maybe a couple of hours run time before being pulled as part of hunting another problem on that bank. £175 per injector will be fine, happy to ship to where ever as they are nice and small.
Cheers,
Rich
Esben Business IT Solutions - http://www.esben.co.uk
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Who is online
Users browsing this forum: No registered users and 29 guests