RS6 v10 injectos upgrade
-
- Neutral
- Posts: 18
- Joined: Sun Aug 15, 2021 4:45 pm
RS6 v10 injectos upgrade
i want to run with E80, would anyone know where i can get bigger injectors, I searched a lot and I didn't find models or information, I just read that they use Porsche injectors
Re: RS6 v10 injectos upgrade
MRC are, maybe understandably, being extremely secretive about the bigger injectors they sell, even going to the point of dremeling off the part numbers before they fit them. So, due to that level of secrecy, there's very little info out there and no-one else that I know of who either sells their own injectors or knows exactly what make/model MRC use and is willing to tell people.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
Re: RS6 v10 injectos upgrade
I can understand MRC’s stance. Fair enough I reckon
-
- Neutral
- Posts: 18
- Joined: Sun Aug 15, 2021 4:45 pm
Re: RS6 v10 injectos upgrade
IanH755 wrote: ↑Mon Sep 06, 2021 8:43 amMRC are, maybe understandably, being extremely secretive about the bigger injectors they sell, even going to the point of dremeling off the part numbers before they fit them. So, due to that level of secrecy, there's very little info out there and no-one else that I know of who either sells their own injectors or knows exactly what make/model MRC use and is willing to tell people.
But if they sell the injectors, it already solves my problem, because I've searched a lot and I haven't found anyone who has them for sale, do you have contact with any of their sellers?
-
- Neutral
- Posts: 18
- Joined: Sun Aug 15, 2021 4:45 pm
Re: RS6 v10 injectos upgrade
Contact MRC Tuning directly, they tend to be quite slow to reply to e-mails but a phone call usually gets results quite quickly. IIRC the new bigger injectors were £2000 back in 2015 and needed the ECU to be remapped at the same time as the injectors are fitted. I don't know if any of the MRC resellers around the Globe will be able to help so I'd start with the original company -
http://www.mrctuning.com/
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)
-
- Neutral
- Posts: 18
- Joined: Sun Aug 15, 2021 4:45 pm
Re: RS6 v10 injectos upgrade
thanksIanH755 wrote: ↑Mon Sep 06, 2021 8:52 pmContact MRC Tuning directly, they tend to be quite slow to reply to e-mails but a phone call usually gets results quite quickly. IIRC the new bigger injectors were £2000 back in 2015 and needed the ECU to be remapped at the same time as the injectors are fitted. I don't know if any of the MRC resellers around the Globe will be able to help so I'd start with the original company -
http://www.mrctuning.com/
-
- 2nd Gear
- Posts: 131
- Joined: Fri Aug 07, 2015 10:35 am
Re: RS6 v10 injectos upgrade
Ricky @ RE Performance is putting porsche injectors into mine, might be worth giving him a call see what he reckons?
Esben Business IT Solutions - http://www.esben.co.uk
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
-
- Neutral
- Posts: 18
- Joined: Sun Aug 15, 2021 4:45 pm
Re: RS6 v10 injectos upgrade
RS6-T28RPH wrote: ↑Sat Sep 25, 2021 11:42 amRicky @ RE Performance is putting porsche injectors into mine, might be worth giving him a call see what he reckons?
What porsche is that? do you know?
-
- 2nd Gear
- Posts: 131
- Joined: Fri Aug 07, 2015 10:35 am
Re: RS6 v10 injectos upgrade
Sorry, no idea, the invoice just says uprated injectorsPetherAlex wrote: ↑Wed Sep 29, 2021 2:16 amRS6-T28RPH wrote: ↑Sat Sep 25, 2021 11:42 amRicky @ RE Performance is putting porsche injectors into mine, might be worth giving him a call see what he reckons?
What porsche is that? do you know?
Esben Business IT Solutions - http://www.esben.co.uk
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Esben Remapping - http://remap.esben.co.uk
2015 BMW X6 M50d (wife-transport, not allowed to touch )
2008 RS6 Avant Phantom Black - MRC Stage2 (ecu, tcu & 2nd cat bypass) 730 PS/1017 nm
2006 BMW 535d Pre-LCI - Stage 1 (340bhp)
2003 VW Polo 1.4Tdi (3pot shitbox) tuning project, was 73bhp, now 120bhp, aiming for 160bhp before it goes bang! (put in the bin)
Who is online
Users browsing this forum: No registered users and 118 guests