KWE inter-cooler silicone hoses

5.0 V10 50v biturbo - 571 bhp
Post Reply
c3nturi0n
3rd Gear
Posts: 466
Joined: Tue May 29, 2018 10:50 am

KWE inter-cooler silicone hoses

Post by c3nturi0n » Wed Mar 20, 2019 6:22 pm

My car is coming up to 10y now where i know for the fact that some parts are past their prime.

I was wondering whether upgrade to KWE's is a "worthy upgrade"?

https://www.kwe-racing.de/Audi/Audi-S6/ ... anguage=en
2008 RS6 Avant (Monza Silver)
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs

User avatar
IanH755
Top Gear
Posts: 1989
Joined: Thu Jan 02, 2014 12:50 pm
Location: Stoke and Norfolk

Re: KWE inter-cooler silicone hoses

Post by IanH755 » Thu Mar 21, 2019 9:14 am

Got them on mine but with the KWE intercoolers as well so I'm not sure about OEM fitment issues, however from my experience so far they're much thicker/stiffer than OEM so they're better able to resist any boost drops that you *may/may-not* get from the OEM pipes expanding slightly under boost pressure (maybe an issue, may not be an issue - depends on boost level). Additionally the pipes are lined to protect them from oil causing damage to the rubber so, along with the extra thickness, they should lest longer than OEM pipes but the OEM may last for decades anyway.

So I got mine for "peace of mind" over the durability rather than for any performance benefit, which would be so small as to be almost zero anyway, so I suppose "worth it" is probably 50/50 at best. I mean it can't hurt to fit them but vs the cost - difficult to say.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).

***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)

c3nturi0n
3rd Gear
Posts: 466
Joined: Tue May 29, 2018 10:50 am

Re: KWE inter-cooler silicone hoses

Post by c3nturi0n » Thu Mar 21, 2019 12:15 pm

cheers Ian... other than KWE's, are there any other brands or part suppliers that do these silicone pipes for RS C6's?
2008 RS6 Avant (Monza Silver)
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs

User avatar
IanH755
Top Gear
Posts: 1989
Joined: Thu Jan 02, 2014 12:50 pm
Location: Stoke and Norfolk

Re: KWE inter-cooler silicone hoses

Post by IanH755 » Thu Mar 21, 2019 7:09 pm

Forge did for a while but have now stopped, however there maybe some still out in shops available.
***OLD*** Daytona C5 RS6 Avant - MRC'd - 500HP & 820NM (PistonHeads Link).

***NEW*** Daytona C6 RS6 Avant - MRC'd - 955HP & 1200NM (PistonHeads Link)

Post Reply

Return to “RS6 / RS6 Plus (C6 Typ 4F) 2008-2010”

Who is online

Users browsing this forum: No registered users and 74 guests