Milltek RS6 C6 Resonated centre pipe

5.0 V10 50v biturbo - 571 bhp
Post Reply
User avatar
grahamh84
2nd Gear
Posts: 107
Joined: Tue Mar 21, 2017 11:44 am

Milltek RS6 C6 Resonated centre pipe

Post by grahamh84 » Tue Jul 03, 2018 4:09 pm

Any interested ? Just swapped mine for non resonated

Curly Head
Neutral
Posts: 28
Joined: Sat Feb 17, 2018 7:19 pm

Re: Milltek RS6 C6 Resonated centre pipe

Post by Curly Head » Tue Jul 03, 2018 7:27 pm

Excuse my ignorance and being a newbie but what’s the difference? 🙈

My car has he Miltek system and the drone at low speeds is quite horrible, I wondered if there was anything I can do to omit it ?

User avatar
RS4LAD
3rd Gear
Posts: 421
Joined: Mon Oct 02, 2017 5:59 am

Re: Milltek RS6 C6 Resonated centre pipe

Post by RS4LAD » Wed Jul 04, 2018 4:40 am

Curly Head wrote:
Tue Jul 03, 2018 7:27 pm
Excuse my ignorance and being a newbie but what’s the difference? 🙈

My car has he Miltek system and the drone at low speeds is quite horrible, I wondered if there was anything I can do to omit it ?
If it’s a non res system you have these res pipes would be the solution to cut the drone down.

User avatar
A20LEE
4th Gear
Posts: 931
Joined: Fri Apr 18, 2008 9:26 pm
Location: Leeds

Re: Milltek RS6 C6 Resonated centre pipe

Post by A20LEE » Wed Jul 04, 2018 6:19 am

How much difference was there in noise levels switching from res to non res? Thinking about swap it my supersprint res for a non res.

c3nturi0n
3rd Gear
Posts: 466
Joined: Tue May 29, 2018 10:50 am

Re: Milltek RS6 C6 Resonated centre pipe

Post by c3nturi0n » Wed Jul 04, 2018 9:22 am

I have a non-res in mine and up to 40mph it is tad "noisy" (to a point that I will either need ear plugs or start wearing a helmet soon :) )... it does indeed have that amazing sound when on a proper run but tbh if used as everyday car it is borderline "tolerable".

thx to BOSE and occasional mega hit such as "Wheels on the bus..." our journeys are no short of fun.
2008 RS6 Avant (Monza Silver)
- Stage II MRC tune with gearbox (720PS/850Nm)
- MIJ Powerflow exhaust (non-res)
- H&R ARBs

robin993
1st Gear
Posts: 60
Joined: Thu May 10, 2012 5:36 pm

Re: Milltek RS6 C6 Resonated centre pipe

Post by robin993 » Wed Jul 25, 2018 4:47 pm

I have just gone through the Miltek options. My MRC stage 2 car came with a non resonated cat back system and for me it was just too loud. I had a family trip to friends in holland and on the way home i just couldn't put up with the drone at 80mph. it was nice and quiet at 100 or at 60.. i ended up driving home in 5th as this was a little better. When i got home I ordered and fitted the resonated system, there is still a little drone at 80, but nothing to bad. it still pops on downshift and crackles on overrun.. so for me resonated is the way to go.

Curly Head
Neutral
Posts: 28
Joined: Sat Feb 17, 2018 7:19 pm

Re: Milltek RS6 C6 Resonated centre pipe

Post by Curly Head » Wed Jul 25, 2018 8:53 pm

Is there any difference in performance or is it negligible ?

robin993
1st Gear
Posts: 60
Joined: Thu May 10, 2012 5:36 pm

Re: Milltek RS6 C6 Resonated centre pipe

Post by robin993 » Thu Jul 26, 2018 10:21 am

MRC told me that there is no difference in performance and mapping. The resonated pipe is the same diameter and straight through, but has perforations in the wall and a silence can. so from a back pressure point of view it must be almost identical.

robin993
1st Gear
Posts: 60
Joined: Thu May 10, 2012 5:36 pm

Re: Milltek RS6 C6 Resonated centre pipe

Post by robin993 » Thu Jul 26, 2018 10:22 am

MRC told me that there is no difference in performance and mapping. The resonated pipe is the same diameter and straight through, but has perforations in the wall and a silence can. so from a back pressure point of view it must be almost identical.

User avatar
grahamh84
2nd Gear
Posts: 107
Joined: Tue Mar 21, 2017 11:44 am

Re: Milltek RS6 C6 Resonated centre pipe

Post by grahamh84 » Thu Jul 26, 2018 10:45 am

Attachments
26EF4B04-7A76-48E1-B387-28355051FCE4.jpeg

robin993
1st Gear
Posts: 60
Joined: Thu May 10, 2012 5:36 pm

Re: Milltek RS6 C6 Resonated centre pipe

Post by robin993 » Thu Jul 26, 2018 3:26 pm

That is a shame, not long ago I paid a shed load for the same. I have some non resonated pipes if anyone wants to buy them.. minimal use.

Curly Head
Neutral
Posts: 28
Joined: Sat Feb 17, 2018 7:19 pm

Re: Milltek RS6 C6 Resonated centre pipe

Post by Curly Head » Thu Jul 26, 2018 5:38 pm

grahamh84 wrote:
Thu Jul 26, 2018 10:45 am
https://rover.ebay.com/rover/0/0/0?mpre ... 3068744348

Now listed on eBay
How much do you want for them?

Post Reply

Return to “RS6 / RS6 Plus (C6 Typ 4F) 2008-2010”

Who is online

Users browsing this forum: No registered users and 63 guests