imola yellow RS6 street fighter

[Absindhi]

All mods on order
Etektuning TTE850+ turbos
Kwe racing big coolers
Kwe racing full exhaust with downpipes
Kwe racing high pressure fuel pumps
Speaking to ESS TUNING FOR MY ENGINE AND GEARBOX TUNE.
KW V3 Coilovers
Bmc filters
21x11 ROHANA RFX10 5x112 +30
295/30zr21 pirelli pzero corsa
And munch munch more

Sent from my iPhone RS6 using Tapatalk Pro

[CHEQUERED]

Fantastic Color!! You will love the car!!


Hopefully your KWE parts fit, my Down pipes were rubbish and it seems lots of people have the same issues. Make sure you get some sort of guarantee that if they dont fit you can get your money back.

[Absindhi]

Are You serious????Let me rather look somewhere else.
What else did you order


Sent from my iPhone RS6 using Tapatalk Pro

[daytonamart]

Great colour, not too stealthy though.

[Absindhi]

Great colour, not too stealthy though.

True story just a name that came to me


Sent from my iPhone RS6 using Tapatalk Pro

[IanH755]

I have KWE coolers and exhaust (different downpipes) fitted to mine -

Exhaust sounds amazing but fitment was poor and needed about 5hrs of rework to make it fit properly.

Coolers aren't the best in traffic as they get hot quickly and stay hot until you can get to 50-60mph (100kph) when they start to cool down slowly (so not good for Drag race but fine for fast road driving) but they do make 900+hp OK. The cooler fitment needs work too as they need the OEM sized plastic "air guide" from the bumper to the front of the much larger KWE Cooler modifying so there's no gap between the smaller guide and the bigger Cooler for the air to escape.

[Absindhi]

I have KWE coolers and exhaust (different downpipes) fitted to mine -

Exhaust sounds amazing but fitment was poor and needed about 5hrs of rework to make it fit properly.

Coolers aren't the best in traffic as they get hot quickly and stay hot until you can get to 50-60mph (100kph) when they start to cool down slowly (so not good for Drag race but fine for fast road driving) but they do make 900+hp OK. The cooler fitment needs work too as they need the OEM sized plastic "air guide" from the bumper to the front of the much larger KWE Cooler modifying so there's no gap between the smaller guide and the bigger Cooler for the air to escape.

Great stuff
Thanks for the advise buddy


Sent from my iPhone RS6 using Tapatalk Pro